MAX8546EUB+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Base Part Number | MAX8546 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 23.24V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 15A |
| Voltage - Supply (Vcc/Vdd) | 2.7V~28V |
| Control Features | Enable |
| Input Voltage (Min) | 2.5V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 300kHz |
| Input Voltage (Max) | 5.5V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 360kHz |
| Max Duty Cycle | 86 % |
| Clock Sync | No |
| Length | 3mm |
| Width | 3mm |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX8546EUB+T Overview
This switching controller fits most application requirements since it is packaged in a 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package. There is enough capacity in the dc motor controller to generate the output for the 1 input. A solid enclosure of Tape & Reel (TR) surrounds pmic. The program can handle Transistor Driver dc switching's outputs (s). 2.7V~28V is the operating voltage and supply voltage of the dc control. Qualified to work in an dc switcher with -40°C~85°C TA. It can switch at 300kHz. The Surface Mount makes it ideal for general dc dc regulator. The dcdc regulator features Enable for efficient switching control. A SWITCHING CONTROLLER analog IC is connected to the switch converters. DUAL are the position of the terminal of the switching converters. An array of 10 terminations of dc switching. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. There is a DC switcher's nominal voltage of 5V. Search for "MAX8546" to find other relevant dc to dc converter ics. Switching converter has a total of 10 pins. Switching converter is a type of Switching Regulator or Controllers in particular. It is recommended that the dc dc voltage regulator's minimum input voltage be 2.5V. Test statistics indicate DC regulator outputs 23.24V voltage. The dc to dc regulator can only accept a maximum input voltage of 5.5V. You should note down the dc dc regulator's usual output current of 15A when you start a project. The maximum duty cycle of this voltage regulator dc to dc is set to 86 % to ensure reliability during power-up and power-down. Having a Surface Mount makes DC switcher suitable for most application and prototype designs. DC regulator360kHz has the maximum frequency.
MAX8546EUB+T Features
Transistor Driver Outputs
Switching Frequency: 300kHz
Enable
PULSE WIDTH MODULATION
Max Duty Cycle: 86 %
MAX8546EUB+T Applications
There are a lot of Maxim Integrated MAX8546EUB+T DC to DC converter applications.
- Packaging
- Remotely powered electric motors
- Various CNC machine tools
- Computer-related products
- Television equipment
- Geothermal power
- Electrical power transmission
- SMT equipment
- Emergency lighting monitoring equipment
- Low output voltage switching power supply circuits
