MAX8548EUB+

10 Terminals 2.7V~28V 10-Pin MAX8548 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs 100kHz Transistor Driver

Manufacturer: Maxim Integrated
Nocochips NO: 503-MAX8548EUB+
Package: 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)
Datasheet: PDF
Stock: 777
Description: 10 Terminals 2.7V~28V 10-Pin MAX8548 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs 100kHz Transistor Driver (Kg)

Details

Tags

Parameters
Control Technique	PULSE WIDTH MODULATION
Synchronous Rectifier	Yes
Switcher Configuration	PUSH-PULL
Max Frequency	120kHz
Max Duty Cycle	95 %
Clock Sync	No
Length	3mm
Width	3mm
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	10-TFSOP, 10-MSOP (0.118, 3.00mm Width)
Number of Pins	10
Operating Temperature	-40°C~85°C TA
Packaging	Tube
Published	2008
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	10
ECCN Code	EAR99
Terminal Finish	Matte Tin (Sn)
Subcategory	Switching Regulator or Controllers
Technology	BICMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Terminal Pitch	0.5mm
Base Part Number	MAX8548
Function	Step-Down
Number of Outputs	1
Output Voltage	23V
Output Type	Transistor Driver
Operating Supply Voltage	28V
Input Voltage-Nom	5V
Analog IC - Other Type	SWITCHING CONTROLLER
Operating Supply Current	1.2mA
Nominal Supply Current	1.2mA
Output Configuration	Positive
Output Current	15A
Voltage - Supply (Vcc/Vdd)	2.7V~28V
Control Features	Enable
Input Voltage (Min)	2.7V
Topology	Buck
Control Mode	VOLTAGE-MODE
Frequency - Switching	100kHz
Input Voltage (Max)	5.5V

MAX8548EUB+ Overview

Capsuled in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package, the switching controller suits most application needs. It is sufficient to generate 1 outputs with this dc motor controller. Packaging for the pmic consists of Tube solid enclosures. With Transistor Driver dc switching's output (s), it is able to handle it. This dc control has a supply voltage and operating voltage of 2.7V~28V. Qualified to work in an dc switcher with -40°C~85°C TA. With this switching controller, you can switch at 100kHz. dc dc regulators can be carried out with Surface Mount. Enable provides dcdc regulator efficient switching control. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. A switching converters's terminal (s) sits at the DUAL position. Various 10 terminations. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. The DC switcher's nominal voltage is 5V. MAX8548 can be used to locate other relevant dc to dc converter ics. 10 pins are present on switching converter. Switching converter is a special type of Switching Regulator or Controllers. It is recommended that the dc dc voltage regulator's minimum input voltage be 2.7V. As determined by the test statistics, the output voltage of DC regulator is 23V. It should be fully noted that the dc to dc regulator only accepts 5.5V input voltage at most. In most cases, the output current of the dc dc regulator will be 15A, so note that when you start the project. A duty cycle set at 95 % ensures voltage regulator dc to dc reliability during power-on and power-off. The Surface Mount makes DC switcher suitable for most applications and prototypes. DC regulators have a maximum frequency of 120kHz. In order for the voltage regulator dc to dc to perform safely and reliably in a circuit, users are advised to apply 28V. There is 1.2mA supply current for it. nominal current supply for this the controllers dc is 1.2mA.