MAX8548EUB+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Base Part Number | MAX8548 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 23.24V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 15A |
| Voltage - Supply (Vcc/Vdd) | 2.7V~28V |
| Control Features | Enable |
| Input Voltage (Min) | 2.5V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 100kHz |
| Input Voltage (Max) | 5.5V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 120kHz |
| Duty Cycle (Max) | 95% |
| Clock Sync | No |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX8548EUB+T Overview
It comes in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package, which makes switching controller suitable for most applications. dc motor controller is suitable for 1 output generation. The pmic is packaged in Tape & Reel (TR) solid enclosure. Transistor Driver dc switching's outputs (s) are supported. The supply and operating voltage of the dc control are 2.7V~28V. Suitable for a -40°C~85°C TA dc switcher. Switching can be done at 100kHz with this switching controller. The Surface Mount allows it to be used for dc dc regulator in general. In order to control switching efficiently, the dcdc regulator features Enable. The switch converters are connected to a SWITCHING CONTROLLER analog IC. Thare switching converters has a terminal (s) at DUAL . A variety of dc switching's functions can be performed on 10 terminations. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 5V is input. A search for "MAX8548" will reveal other relevant dc to dc converter ics. Specifically, switching converter falls under the Switching Regulator or Controllers category. It is recommended that the dc dc voltage regulator's minimum input voltage be 2.5V. According to the test statistics, DC regulator outputs 23.24V voltage. It should be fully noted that the dc to dc regulator only accepts 5.5V input voltage at most. You should note down the dc dc regulator's usual output current of 15A when you start a project. Because of DC switcher's Surface Mount, it is suitable for most prototype designs and applications. The max frequency of the pmic can reach 120kHz.
MAX8548EUB+T Features
Transistor Driver Outputs
Switching Frequency: 100kHz
Enable
PULSE WIDTH MODULATION
MAX8548EUB+T Applications
There are a lot of Maxim Integrated MAX8548EUB+T DC to DC converter applications.
- Nuclear power plants
- Domestic water pumps
- seismic instrument power circuits
- Die casting equipment
- Serial communication converter
- Hydraulic presses
- Automatic plug-in machines
- Plate bending machines
- Gear/thread machining machines
- Electric water heaters
