MAX8552EUB+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 444mW |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~6.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | MAX8552 |
| Pin Count | 10 |
| Max Output Current | 30A |
| Operating Supply Voltage | 5V |
| Nominal Supply Current | 500μA |
| Output Current | 200mA |
| Input Type | Non-Inverting |
| Rise Time | 11ns |
| Fall Time (Typ) | 8 ns |
| Rise / Fall Time (Typ) | 14ns 9ns |
| Channel Type | Synchronous |
| Number of Drivers | 2 |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.5V |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX8552EUB+ Overview
There is greater flexibility with the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package.There is a package in the form of Tube.For its configuration, it incorporates 2 drivers.In this case, gate drivers is mounted along the way of Surface Mount.In the absence of a 4.5V~6.5V supply voltage, it can demonstrate its superiority.Gate type N-Channel MOSFET has been used in its design.-40°C~150°C TJ is the allowed temperature range for this device.Input type of Non-Inverting is used.Its configuration is based on a total of 10 terminations.Numerous related parts are available for its base part number MAX8552.The device is mounted using Surface Mount.As a result, it is configured with 10 pins when it is designed.Mosfet driver is designed specifically to run on 5V volts of power.The maximum output current can amount to 30A.The number of component pins is 10.The output current can be set to 200mA.Considering its maximum power dissipation, 444mW shows its maximum capacity to transfer and conduct power loss without overheating.Mosfet gate drivers is recommended that the operating supply voltage be set to 5V.
MAX8552EUB+ Features
Embedded in the Tube package
2 drivers
Employing a gate type of N-Channel MOSFET
10 pins
Maximum power dissipation of 444mW
MAX8552EUB+ Applications
There are a lot of Maxim Integrated MAX8552EUB+ gate drivers applications.
- Automotive Applications
- Broadcast equipment
- Commercial and agricultural vehicles (CAV)
- RGB applications
- Isolated Gate Driver Supplies
- DC/DC converters
- UPS systems
- Power factor correction (PFC) circuits
- Active filtering
- Digitally controlled power supplies
