MAX8577EUB+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Base Part Number | MAX8577 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 25V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 5.5V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 15A |
| Voltage - Supply (Vcc/Vdd) | 3V~28V |
| Control Features | Current Limit, Soft Start |
| Input Voltage (Min) | 3V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 200kHz~500kHz |
| Input Voltage (Max) | 28V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 500kHz |
| Clock Sync | No |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX8577EUB+T Overview
The switching controller fits in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package and is ideal for most applications. 1 outputs are supported by the dc motor controller. The pmic is packaged in Tape & Reel (TR) solid enclosure. It is capable of handling Transistor Driver dc switching's outputs (s). This dc control has a supply voltage and operating voltage of 3V~28V. A -40°C~85°C TA dc switcher is not a problem. The switching controller is capable of switching at the 200kHz~500kHz position. It is suitable for general dc dc regulator when it is set to Surface Mount. In order to control switching efficiently, the dcdc regulator features Current Limit, Soft Start. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. There are a DUAL terminal on the switching converters. A variety of terminations with 10 of dc switching. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. DC switcher's input voltageis 12V volts. Searching "MAX8577" will return other relevant dc to dc converter ics. There are a total of 10 pins on switching converter. An input voltage of 3V is the minimum required for the dc dc voltage regulator. Statistically, DC regulator outputs 25V volts. At most, the dc to dc regulator accepts 28V input voltage. A starting point for a project is to note down the dc dc regulator's usual output current, which is 15A. In most applications and prototype designs, DC switcher is qualified as a Surface Mount. DC regulator has a maximum frequency of 500kHz. Users should apply 5.5V to operate the voltage regulator dc to dc safely and reliably.
MAX8577EUB+T Features
Transistor Driver Outputs
Switching Frequency: 200kHz~500kHz
Current Limit, Soft Start
PULSE WIDTH MODULATION
MAX8577EUB+T Applications
There are a lot of Maxim Integrated MAX8577EUB+T DC to DC converter applications.
- Linear guide
- Milling machines
- Thermal power
- Scientific testing
- Mobile phones
- Imported equipment
- Refrigerators of central air conditioners
- Hydrogen power
- SMT equipment
- Electrical distribution systems
