MAX8578EUB+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Base Part Number | MAX8578 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 25V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 5.5V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 15A |
| Voltage - Supply (Vcc/Vdd) | 3V~28V |
| Control Features | Current Limit, Soft Start |
| Input Voltage (Min) | 3V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 200kHz~500kHz |
| Input Voltage (Max) | 28V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 500kHz |
| Clock Sync | No |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX8578EUB+ Overview
With its 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package, the switching controller fits the needs of most applications. dc motor controller is suitable for 1 output generation. PMIC is packaged in a solid enclosure of Tube. It is capable of handling Transistor Driver dc switching's outputs (s). The supply and operating voltage of the dc control are 3V~28V. Suitable for work in a -40°C~85°C TA dc switcher. Using this switching controller, it is possible to switch at 200kHz~500kHz. The Surface Mount value makes it suitable for general dc dc regulator. Switching control is made easier with the dcdc regulator's Current Limit, Soft Start. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. There are a terminal (s) on the switching converters that are designed at DUAL. A variety of dc switching's functions can be performed on 10 terminations. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. The DC switcher's nominal voltage is 12V. MAX8578 can be searched for other relevant dc to dc converter ics. Switching converter has a total of 10 pins. The type is a particular Switching Regulator or Controllers of switching converter. dc dc voltage regulators should have a minimum input voltage of 3V. Statistically, the DC regulator outputs 25V voltage. The dc to dc regulator can only accept a maximum input voltage of 28V. In most cases, the dc dc regulator's output current is 15A. This information should be noted when you begin working with the component. In most applications and prototypes, DC switcher's Surface Mount makes it suitable. This dc regulatorhas a max frequency of 500kHz. When running the voltage regulator dc to dc in a circuit, users should apply 5.5V to ensure safety and reliability.
MAX8578EUB+ Features
Transistor Driver Outputs
Switching Frequency: 200kHz~500kHz
Current Limit, Soft Start
PULSE WIDTH MODULATION
MAX8578EUB+ Applications
There are a lot of Maxim Integrated MAX8578EUB+ DC to DC converter applications.
- Flaw detection equipment
- Digital display device
- Hydro power
- Machining centers
- Balance equipment
- Wide-range voltage regulation circuits
- Industrial controllers
- Remotely powered electric motors
- Access control systems
- Overvoltage protection circuits in TV sets
