MAX8578EUB+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Base Part Number | MAX8578 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 25V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 5.5V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 15A |
| Voltage - Supply (Vcc/Vdd) | 3V~28V |
| Control Features | Current Limit, Soft Start |
| Input Voltage (Min) | 3V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 200kHz~500kHz |
| Input Voltage (Max) | 28V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 500kHz |
| Clock Sync | No |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX8578EUB+T Overview
Capsuled in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package, the switching controller can be used for a wide range of applications. dc motor controller is suitable for 1 output generation. PMIC is packaged in a solid enclosure of Tape & Reel (TR). With Transistor Driver dc switching's output (s), it is able to handle it. A 3V~28V voltage is supplied to the dc control and used for operating it. Worked in an dc switcher with a -40°C~85°C TA rating. This switching controller can switch at 200kHz~500kHz. A generalization of dc dc regulator can be made using Surface Mount. Current Limit, Soft Start is used for efficient switching control in the dcdc regulator. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. DUAL are the position of the terminal of the switching converters. A variety of dc switching's functions can be performed on 10 terminations. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 12V is input. MAX8578 can be used to locate other relevant dc to dc converter ics. 10 pins are on switching converter. Specifically, switching converter falls under the Switching Regulator or Controllers category. Input voltage of dc dc voltage regulator should be 3V. Statistically, the DC regulator outputs 25V voltage. At most, the dc to dc regulator accepts 28V input voltage. It's important to remember that the dc dc regulator's normaloutput current is 15A, so you should note it down when starting a new project. Because of DC switcher's Surface Mount, it is suitable for most prototype designs and applications. This dc regulatorhas a max frequency of 500kHz. If the user wishes to run the voltage regulator dc to dc in a circuit safely and reliably, they should apply 5.5V.
MAX8578EUB+T Features
Transistor Driver Outputs
Switching Frequency: 200kHz~500kHz
Current Limit, Soft Start
PULSE WIDTH MODULATION
MAX8578EUB+T Applications
There are a lot of Maxim Integrated MAX8578EUB+T DC to DC converter applications.
- Scientific testing
- Correction machines
- Geothermal power
- Industrial robots
- Network technology
- Shearing machines
- Product testing
- Servo drive system
- Bending machines
- Product burn-in
