MAX8579EUB+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Base Part Number | MAX8579 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 25V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 5.5V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 15A |
| Voltage - Supply (Vcc/Vdd) | 3V~28V |
| Control Features | Current Limit, Enable, Soft Start |
| Input Voltage (Min) | 3V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 200kHz~500kHz |
| Input Voltage (Max) | 28V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 500kHz |
| Clock Sync | No |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX8579EUB+ Overview
In the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package, the switching controller meets most application requirements. 1 outputs are supported by the dc motor controller. There is a Tube solid enclosure around the pmic. With this function, you can deal with Transistor Driver dc switching's outputs (s). Voltages 3V~28V are the dc control's supply voltage and operating voltage, respectively. Qualified to work in an dc switcher with -40°C~85°C TA. The switching controller can be switched at 200kHz~500kHz. As it has a Surface Mount value, it can be used for general dc dc regulator. To provide efficient switching control, Current Limit, Enable, Soft Start is included in the dcdc regulator. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. Terminal (s) of the switching converters are designed at the DUAL position. A variety of terminations with 10 of dc switching. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 12V. You can find other relevant dc to dc converter ics by searching "MAX8579". 10 pins are present on switching converter. In particular, switching converter is a type of Switching Regulator or Controllers. This dc dc voltage regulator should be powered by a voltage of 3V. As determined by the test statistics, the output voltage of DC regulator is 25V. At most, the dc to dc regulator accepts 28V input voltage. It's important to remember that the dc dc regulator's normaloutput current is 15A, so you should note it down when starting a new project. DC switcher's Surface Mount qualifies it for most applications and prototypes. There is a maximum frequency of 500kHz for this dc regulators. To operate the voltage regulator dc to dc safely and reliably, users should apply 5.5V.
MAX8579EUB+ Features
Transistor Driver Outputs
Switching Frequency: 200kHz~500kHz
Current Limit, Enable, Soft Start
PULSE WIDTH MODULATION
MAX8579EUB+ Applications
There are a lot of Maxim Integrated MAX8579EUB+ DC to DC converter applications.
- Precision electronic equipment
- Medical monitoring systems
- Alternators
- Plate bending machines
- Flexible manufacturing cells
- Elevator lighting
- Fire elevators
- Digital display device
- Communication system
- Digital video recorders
