MAX8579EUB+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Base Part Number | MAX8579 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 25V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 5.5V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 15A |
| Voltage - Supply (Vcc/Vdd) | 3V~28V |
| Control Features | Current Limit, Enable, Soft Start |
| Input Voltage (Min) | 3V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 200kHz~500kHz |
| Input Voltage (Max) | 28V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 500kHz |
| Clock Sync | No |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX8579EUB+T Overview
With its 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package, the switching controller fits the needs of most applications. 1 outputs are supported by the dc motor controller. A solid enclosure of Tape & Reel (TR) surrounds pmic. There are Transistor Driver dc switching's output (s) that it can handle. 3V~28V is the supply voltage and the operating voltage of the dc control. A -40°C~85°C TA dc switcher is not a problem. In this switching controller, the switch can be set to 200kHz~500kHz. The Surface Mount allows it to be used for dc dc regulator in general. Switching control is made easier with the dcdc regulator's Current Limit, Enable, Soft Start. An analog IC SWITCHING CONTROLLER is connected to the switch converters. DUAL are the position of the terminal of the switching converters. A variety of dc switching's functions can be performed on 10 terminations. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 12V. Searching "MAX8579" will return other relevant dc to dc converter ics. Total pins of switching converter are 10. Switching converter is a type of Switching Regulator or Controllers in particular. The minimum input voltage of the dc dc voltage regulator should be 3V. Based on the test statistics, DC regulator outputs voltage 25V. At most, the dc to dc regulator accepts 28V input voltage. If you are starting a new project, you should note the dc dc regulator's typical output current is 15A. The Surface Mount makes DC switcher suitable for most applications and prototypes. DC regulator's maximum frequency is 500kHz. It is suggested that users apply 5.5V to the voltage regulator dc to dc in order to run it safely and reliably in a circuit.
MAX8579EUB+T Features
Transistor Driver Outputs
Switching Frequency: 200kHz~500kHz
Current Limit, Enable, Soft Start
PULSE WIDTH MODULATION
MAX8579EUB+T Applications
There are a lot of Maxim Integrated MAX8579EUB+T DC to DC converter applications.
- Printing equipment
- Game consoles
- Various CNC machine tools
- Product testing
- Sink circuits
- Overvoltage protection circuits in TV sets
- Various precision measuring detectors
- Smart grid
- Injection molding machinery
- Photovoltaic power
