MAX8597ETP+

20 Terminals 4.5V~28V 20-Pin MAX8597 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs 200kHz~1.4MHz Transistor Driver

Manufacturer: Maxim Integrated
Nocochips NO: 503-MAX8597ETP+
Package: 20-WFQFN Exposed Pad
Datasheet: PDF
Stock: 700
Description: 20 Terminals 4.5V~28V 20-Pin MAX8597 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs 200kHz~1.4MHz Transistor Driver (Kg)

Inquiry Now

Details

Tags

Parameters
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	20
ECCN Code	EAR99
Terminal Finish	Matte Tin (Sn)
Subcategory	Switching Regulator or Controllers
Technology	BICMOS
Terminal Position	QUAD
Peak Reflow Temperature (Cel)	260
Terminal Pitch	0.5mm
Base Part Number	MAX8597
Function	Step-Down
Number of Outputs	1
Output Voltage	28V
Output Type	Transistor Driver
Operating Supply Voltage	28V
Input Voltage-Nom	5V
Analog IC - Other Type	SWITCHING CONTROLLER
Operating Supply Current	5mA
Nominal Supply Current	3.4A
Output Configuration	Positive
Output Current	20A
Voltage - Supply (Vcc/Vdd)	4.5V~28V
Control Features	Current Limit, Enable, Frequency Control, Soft Start
Input Voltage (Min)	4.5V
Topology	Buck
Control Mode	VOLTAGE-MODE
Frequency - Switching	200kHz~1.4MHz
Control Technique	PULSE WIDTH MODULATION
Synchronous Rectifier	Yes
Switcher Configuration	PUSH-PULL
Max Frequency	1.4MHz
Max Duty Cycle	99.5 %
Clock Sync	No
Duty Cycle	99.5 %
Height Seated (Max)	0.8mm
Length	4mm
Width	4mm
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	20-WFQFN Exposed Pad
Number of Pins	20
Operating Temperature	-40°C~85°C TA
Packaging	Tube
Published	2005

MAX8597ETP+ Overview

It comes in a 20-WFQFN Exposed Pad package, so switching controller can be used for most applications. There is enough capacity in the dc motor controller to generate the output for the 1 input. PMIC packaging is solid with a Tube enclosure. There are Transistor Driver dc switching's output (s) that it can handle. Voltages 4.5V~28V are the dc control's supply voltage and operating voltage, respectively. Suitable for working in an dc switcher that has a -40°C~85°C TA. A switching controller such as this can switch at a value of 200kHz~1.4MHz . dc dc regulator is made easier with Surface Mount. DCDC regulator is controlled efficiently by Current Limit, Enable, Frequency Control, Soft Start. A SWITCHING CONTROLLER analog IC is connected to the switch converters. The switching converters's terminals (s) are designed at QUAD. The 20 terminations can be used for a wide range of dc switching. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. DC switcher's voltage input is 5V. MAX8597 can be searched for other relevant dc to dc converter ics. The switching converter has a total of 20 pins. Particularly, switching converter is a type of Switching Regulator or Controllers. Input voltage of dc dc voltage regulator should be 4.5V. As determined by the test statistics, the output voltage of DC regulator is 28V. You should note down the dc dc regulator's usual output current of 20A when you start a project. As a result of this, the maximum duty cycle of the voltage regulator dc to dc must remain 99.5 % during power-up and power-down. Having a Surface Mount makes DC switcher suitable for most application and prototype designs. It is estimated that this dc regulatorhas a maximum frequency of 1.4MHz. To operate the voltage regulator dc to dc safely and reliably, users should apply 28V. A current of 5mA is supplied to it. The nominal supply current for this the controllers dc is 3.4A.

MAX8597ETP+ Features

Transistor Driver Outputs
Switching Frequency: 200kHz~1.4MHz
Current Limit, Enable, Frequency Control, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 99.5 %