MAX8597ETP+T

20 Terminals 4.5V~28V MAX8597 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs 200kHz~1.4MHz Transistor Driver

Manufacturer: Maxim Integrated
Nocochips NO: 503-MAX8597ETP+T
Package: 20-WFQFN Exposed Pad
Datasheet: PDF
Stock: 838
Description: 20 Terminals 4.5V~28V MAX8597 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs 200kHz~1.4MHz Transistor Driver (Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	20-WFQFN Exposed Pad
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
Published	2005
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	20
ECCN Code	EAR99
Terminal Finish	Matte Tin (Sn)
Subcategory	Switching Regulator or Controllers
Technology	BICMOS
Terminal Position	QUAD
Peak Reflow Temperature (Cel)	260
Terminal Pitch	0.5mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	MAX8597
JESD-30 Code	S-XQCC-N20
Function	Step-Down
Number of Outputs	1
Output Voltage	28V
Output Type	Transistor Driver
Operating Supply Voltage	28V
Input Voltage-Nom	5V
Analog IC - Other Type	SWITCHING CONTROLLER
Operating Supply Current	5mA
Nominal Supply Current	3.4A
Output Configuration	Positive
Output Current	20A
Voltage - Supply (Vcc/Vdd)	4.5V~28V
Control Features	Current Limit, Enable, Frequency Control, Soft Start
Input Voltage (Min)	4.5V
Topology	Buck
Control Mode	VOLTAGE-MODE
Frequency - Switching	200kHz~1.4MHz
Control Technique	PULSE WIDTH MODULATION
Synchronous Rectifier	Yes
Switcher Configuration	PUSH-PULL
Max Frequency	1.4MHz
Max Duty Cycle	99.5 %
Clock Sync	No
Duty Cycle	99.5 %
Height Seated (Max)	0.8mm
Length	4mm
Width	4mm
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

MAX8597ETP+T Overview

With a 20-WFQFN Exposed Pad package, the switching controller is suitable for a wide range of applications. It is sufficient to generate 1 outputs with this dc motor controller. There is a Tape & Reel (TR) solid enclosure around the pmic. There are Transistor Driver dc switching's output (s) that it can handle. DC control operates at 4.5V~28V volts and has 4.5V~28V supply voltage. Qualified to work in an dc switcher with -40°C~85°C TA. Using this switching controller, it is possible to switch at 200kHz~1.4MHz. The Surface Mount value makes it suitable for general dc dc regulator. DCDC regulator is controlled efficiently by Current Limit, Enable, Frequency Control, Soft Start. An analog IC SWITCHING CONTROLLER is connected to the switch converters. The switching converters's terminals (s) are designed at QUAD. A variety of terminations with 20 of dc switching. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. DC switcher's input voltageis set to 5V. You can find other relevant dc to dc converter ics by searching "MAX8597". The type is a particular Switching Regulator or Controllers of switching converter. An input voltage of 4.5V is the minimum required for the dc dc voltage regulator. A 28V voltage of DC regulator was detected in the test statistics. In most cases, the output current of the dc dc regulator will be 20A, so note that when you start the project. During power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set to 99.5 %. As DC switcher has a Surface Mount, it's suitable for most applications and prototype designs. DC regulator1.4MHz has the maximum frequency. When running the voltage regulator dc to dc in a circuit, users should apply 28V to ensure safety and reliability. There is a 5mA volt supply current. nominal current supply for this the controllers dc is 3.4A.

MAX8597ETP+T Features

Transistor Driver Outputs
Switching Frequency: 200kHz~1.4MHz
Current Limit, Enable, Frequency Control, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 99.5 %