MAX861IUA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -25°C~85°C TA |
| Packaging | Tube |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Other Analog ICs |
| Max Power Dissipation | 362mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX861 |
| Function | Ratiometric |
| Number of Outputs | 1 |
| Output Voltage | 11V |
| Output Type | Fixed |
| Voltage - Input (Min) | 1.5V 2.5V |
| Input Voltage-Nom | 5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.5V |
| Analog IC - Other Type | SWITCHED CAPACITOR CONVERTER |
| Output Configuration | Positive or Negative |
| Current - Output | 50mA |
| Max Output Voltage | -1.5V |
| Voltage - Output (Min/Fixed) | -Vin 2Vin |
| Topology | Charge Pump |
| Logic Function | Inverting |
| Frequency - Switching | 13kHz 100kHz 250kHz |
| Synchronous Rectifier | No |
| Dropout Voltage | 600mV |
| Min Output Voltage | -5.5V |
| Switcher Configuration | DOUBLER INVERTER |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX861IUA+ Overview
This harley voltage regulator utilizes the Tube package for optimized performance. In this voltage regulator, 8 terminations are present. A SWITCHED CAPACITOR CONVERTER type of analog IC is equipped with this regulator voltage, which is the type of analog IC that is used in it. The space-saving 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package is available for this voltage regulator. There are 1 outputs configured on the voltage regulator. This DC DC switching regulator generates Fixed output on its output pins. Surface Mount-mount switching regulator. Voltage regulators should be operated at -25°C~85°C TA temperature while operating. A DC-DC switching regulator such as this one switches at 13kHz 100kHz 250kHz. This voltage regulator is able to operate with the minimal input voltage of 1.5V 2.5V. As a result, the output voltage of the voltage regulator 12v (Min/Fixed) is -Vin 2Vin. It features maximum design flexibility due to dc to dc voltage regulator's 50mA output current. With its peak reflow temperature of 260, this voltage regulator is essentially indestructible. To meet the switching regulator operation requirements, a nominal input voltage of 5V is provided. Listed under the subcategory of Other Analog ICs is this voltage regulator 12v. There is a DC/DC regulator in this family that belongs to the MAX861 family. Voltage can be produced at 11V volts by voltage regulator. In order to operate voltage regulator, there are 8 pins that must be connected. The output voltage for this switching regulator should be kept at -5.5V at least. There is a maximum output voltage of -1.5V from this voltage regulator 12v. By requiring a minimum voltage of 1.5VV, adjusting voltage regulator reliable performance is guaranteed. DC DC switching regulator can be operated from a voltage of 5.5V as its maximum supply voltage.
MAX861IUA+ Features
1 outputs
Peak reflow temperature (Cel) of 260
8 pins
MAX861IUA+ Applications
There are a lot of Maxim Integrated MAX861IUA+ Voltage Regulators applications.
- Sink circuits
- Terrestrial set-top boxes
- Medical equipment
- Hydro power
- Plate bending machines
- Experimental setup
- Surface processing equipment
- Low output voltage switching power supply circuits
- Handheld GPS
- Precision electronic equipment
