MAX8630WETD25+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-WFDFN Exposed Pad |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Strip |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Matte Tin (Sn) |
| Applications | Backlight |
| Subcategory | Display Drivers |
| Max Power Dissipation | 1.454W |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.4mm |
| Frequency | 1MHz |
| Base Part Number | MAX8630 |
| Pin Count | 10 |
| Number of Outputs | 5 |
| Max Supply Voltage | 5.5V |
| Power Dissipation | 1.454W |
| Max Supply Current | 1.4mA |
| Topology | Switched Capacitor (Charge Pump) |
| Output Current per Channel | 25mA |
| Current - Output / Channel | 25mA |
| Internal Switch(s) | Yes |
| fmax-Min | 1 MHz |
| Dimming | PWM |
| Number of Segments | 5 |
| Voltage - Supply (Min) | 2.7V |
| Multiplexed Display Capability | NO |
| Height Seated (Max) | 0.8mm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MAX8630WETD25+T Overview
There is also a 14-WFDFN Exposed Pad package that is used to save space on the board. LED drivers are designed with 5 outputs.The mounting method adopted is Surface Mount.As a DC DC Regulator, it has high efficiency and reliability.It is capable of operating at a temperature of -40°C~85°C TA. Backlight benefits significantly from the program.Based on the frequency of 1MHz, it operates.There are 14 terminations that are designed to operate with it.The LED light driver has a base configuration of 14 pins.It is possible for undetermined failures to occur if the voltage supply is lower than 2.7V.We estimate that there are 5 segments.This is mounted by Surface Mount.The base part number for this LED driver is MAX8630.5.5V is a reasonable voltage.10 pins are included in it.It is also classified into Display Drivers according to its characteristics.When the maximum supply current is below 1.4mA, it is capable of delivering high efficiency.
MAX8630WETD25+T Features
Available in the 14-WFDFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Frequency of 1MHz
Supply voltage of 3.6V
MAX8630WETD25+T Applications
There are a lot of Maxim Integrated MAX8630WETD25+T LED Driver ICs applications.
- OLED power supply for portable equipment
- LED Lightings for Inspection Devices
- LED Lighting PFCs, Linear Dimmable
- Scanners and Handy Terminals
- LED backlight driver for LCD displays for portable equipment
- Amusement Machines
- Stage and Studio lighting
- Architectural lighting
- Street lighting
- Medical surgery lighting
