MAX8630YETD20+T
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-WFDFN Exposed Pad |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Matte Tin (Sn) |
| Applications | Backlight |
| Max Power Dissipation | 1.454W |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.4mm |
| Frequency | 1MHz |
| Base Part Number | MAX8630 |
| Pin Count | 14 |
| Number of Outputs | 5 |
| Operating Supply Voltage | 5.5V |
| Input Voltage-Nom | 3.6V |
| Max Supply Voltage | 5.5V |
| Power Dissipation | 1.454W |
| Max Supply Current | 1.4mA |
| Input Voltage (Min) | 2.7V |
| Topology | Switched Capacitor (Charge Pump) |
| Output Current per Channel | 25mA |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Dimming | Multi-Step |
| Voltage - Supply (Min) | 2.7V |
| Height Seated (Max) | 0.8mm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX8630YETD20+T Overview
There is a 14-WFDFN Exposed Pad package on the board that is used to save space. It has 5 outputs for LED drivers.As far as mounting is concerned, Surface Mount is adopted.It emerges as a DC DC Regulator with high efficiency.The LED driver has the capability of operating at a temperature of -40°C~85°C TA.The benefits it provides to Backlight are considerable.It operates at 1MHz frequency.A termination of 14 is used to operate the LED driver.It has a base configuration of 14 pins.Failures may occur if the voltage supply is below 2.7V.Surface Mount has been mounted with the device.There is a base part number MAX8630 for this LED driver.5.5V is a reasonable voltage.It is equipped with 14 pin count.The device can deliver high efficiency when the maximal supply current is less than 1.4mA.Powering systems requires an internal voltage of 5.5V.While operating the device, the circuit has 3.6V volts.It is greatly simplified when used with input voltages greater than or equal to 2.7V.
MAX8630YETD20+T Features
Available in the 14-WFDFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Frequency of 1MHz
Operating with the supply voltage of 5.5V
MAX8630YETD20+T Applications
There are a lot of Maxim Integrated MAX8630YETD20+T LED Driver ICs applications.
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- Street lighting
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- Industrial LED Lighting: Image Recognition Devices
- LED Lighting PFCs, Linear Dimmable
- Stage and Studio lighting
- A- lamps
- Portable lighting
- Stage Lighting and Signage
- Sports Facility Lighting
