MAX8630ZETD20+T
| Parameters | |
|---|---|
| Input Voltage-Nom | 3.6V |
| Max Supply Voltage | 5.5V |
| Power Dissipation | 1.454W |
| Max Supply Current | 1.4mA |
| Input Voltage (Min) | 2.7V |
| Topology | Switched Capacitor (Charge Pump) |
| Output Current per Channel | 25mA |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Dimming | Multi-Step |
| Voltage - Supply (Min) | 2.7V |
| Height Seated (Max) | 0.8mm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-WFDFN Exposed Pad |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | MATTE TIN |
| Applications | Backlight |
| Max Power Dissipation | 1.454W |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.4mm |
| Frequency | 1MHz |
| Base Part Number | MAX8630 |
| Pin Count | 14 |
| Number of Outputs | 5 |
| Operating Supply Voltage | 5.5V |
MAX8630ZETD20+T Overview
To save space on the board, it has a 14-WFDFN Exposed Pad package. This LED driver has 5 outputs.The mounting method is Surface Mount.With high efficiency and reliable performance, it emerges as a DC DC Regulator.-40°C~85°C TA is the operating temperature and it works fine.A number of benefits are available to Backlight.A frequency of 1MHz is used as the basis for operation.In order for it to operate, it has 14 terminations.A configuration of this chip is made up of 14 pins.A voltage supply below 2.7V may cause undetermined failures.It has been mounted on Surface Mount.The LED driver can be found under the base part number MAX8630.5.5V is an acceptable voltage.The device has a pin count of 14.When the maximum supply current is below 1.4mA, the device can deliver high efficiency.It is necessary to power systems with a voltage of 5.5VDevice operation requires 3.6V volts from the circuit.Input voltages higher than or equal to 2.7V make its operation much more convenient.
MAX8630ZETD20+T Features
Available in the 14-WFDFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Frequency of 1MHz
Operating with the supply voltage of 5.5V
MAX8630ZETD20+T Applications
There are a lot of Maxim Integrated MAX8630ZETD20+T LED Driver ICs applications.
- LED Lighting PFCs, Linear Dimmable
- LED headlights
- Other Electronic Devices
- Replacement lamps
- Scanners and Handy Terminals
- Flicker-free LED Lighting using R1580N
- LED backlight driver for LCD displays for portable equipment
- OLED power supply for portable equipment
- Sports Facility Lighting
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
