MAX8630ZETD25+
| Parameters | |
|---|---|
| Type | DC DC Regulator |
| Terminal Finish | Matte Tin (Sn) |
| Applications | Backlight |
| Max Power Dissipation | 1.454W |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.4mm |
| Frequency | 1MHz |
| Pin Count | 14 |
| Number of Outputs | 5 |
| Operating Supply Voltage | 5.5V |
| Input Voltage-Nom | 3.6V |
| Input Voltage (Min) | 2.7V |
| Topology | Switched Capacitor (Charge Pump) |
| Switcher Configuration | SINGLE |
| Current - Output / Channel | 25mA |
| Internal Switch(s) | Yes |
| Dimming | Multi-Step |
| Voltage - Supply (Min) | 2.7V |
| Height Seated (Max) | 0.8mm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Mounting Type | Surface Mount |
| Package / Case | 14-WFDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
MAX8630ZETD25+ Overview
The 14-WFDFN Exposed Pad package is used for saving board space. LED drivers design with 5 outputs.Surface Mount is used to mount the led driver.It is highly performing and reliable when it emerges as a DC DC Regulator.-40°C~85°C TA is the operating temperature and it works fine.It is clear that Backlight will benefit from the program.As a result, it operates based on the frequency of 1MHz.The operation of this system is supported by 14 terminations.This LED driver is configured with a base of 14 pins.The voltage supply can fail if it is below 2.7V.The device has a pin count of 14.It is necessary to power systems with a voltage of 5.5VWhen the device is operated, 3.6V volts are applied to the circuit.Working with an input voltage higher than or equal to 2.7V brings great convenience to its operation.
MAX8630ZETD25+ Features
Available in the 14-WFDFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Frequency of 1MHz
Operating with the supply voltage of 5.5V
MAX8630ZETD25+ Applications
There are a lot of Maxim Integrated MAX8630ZETD25+ LED Driver ICs applications.
- Stage Lighting and Signage
- OLED power supply for portable equipment
- Auxiliary lights for on-vehicle cameras
- Stage and Studio lighting
- LED headlights
- Flicker-free LED Lighting using R1580N
- Dimmable LED for vehicle interiors
- White LED Backlight for portable equipment
- General lighting
- Power source for accessories such as car audios, car navigation systems, and ETC systems
