MAX8647ETE+
| Parameters | |
|---|---|
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-WFQFN Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Strip |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Applications | Backlight, Camera Flash |
| HTS Code | 8542.39.00.01 |
| Max Power Dissipation | 1.667W |
| Technology | BICMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Base Part Number | MAX8647 |
| Pin Count | 16 |
| Number of Outputs | 6 |
| Operating Supply Voltage | 5.5V |
| Input Voltage-Nom | 3.6V |
| Power Dissipation | 1.667W |
| Output Current | 24mA |
| Max Supply Current | 1.6mA |
| Voltage - Output | 5V |
| Topology | Switched Capacitor (Charge Pump) |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Switcher Configuration | DOUBLER INVERTER |
| Internal Switch(s) | Yes |
| Dimming | I2C |
| Number of Segments | 6 |
| Switching Frequency | 1MHz |
| Height Seated (Max) | 0.8mm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
MAX8647ETE+ Overview
Space is saved using its 16-WFQFN Exposed Pad package. There are 6 outputs used for the design of this LED drivers.Surface Mount is used to mount the led driver.When it emerges as a DC DC Regulator, it performs extremely well and is highly reliable.LED drivers capable of operating at -40°C~85°C TA can be used.It is clear that Backlight, Camera Flash will benefit from the program.For its operation, 16 terminations are designed.This module has 16 pins as its base.The number of segments is estimated to be 6.It's mounted in Surface Mount.Under the base part number MAX8647, you'll find this LED driver.The device has a voltage output of 5V volts.In addition, it has 16 pins.At its minimal input voltage, it operates at 2.7V.The maximum supply current is reached when 5.5V is reached.If the maximum supply current is less than 1.6mA, the device is capable of providing high efficiency.You can supply 24mA current to the load.The internal voltages needed to power systems is 5.5V.When the switching frequency is maintained at 1MHz, this electronic component is able to fully play its functions.When the device is operated, it has 3.6V volts assigned to it.
MAX8647ETE+ Features
Available in the 16-WFQFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Operating with the supply voltage of 5.5V
Switching frequency of 1MHz
MAX8647ETE+ Applications
There are a lot of Maxim Integrated MAX8647ETE+ LED Driver ICs applications.
- Stage and Studio lighting
- OLED power supply for portable equipment
- Gallery lighting
- Museum lighting
- Replacement lamps
- Constant Voltage Power Source for portable equipment
- High-end retail lighting
- Portable lighting
- Down lighting
- Dimmable LED for vehicle interiors
