MAX8650EEG+
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 24-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.635mm |
| Base Part Number | MAX8650 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 5.5V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 25A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~28V |
| Control Features | Current Limit, Enable, Frequency Control, Power Good, Soft Start |
| Input Voltage (Min) | 4.5V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 200kHz~1MHz |
| Input Voltage (Max) | 28V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 1.2MHz |
| Length | 8.65mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
MAX8650EEG+ Overview
Capsuled in the 24-SSOP (0.154, 3.90mm Width) package, the switching controller suits most application needs. For outputs of 1, this dc motor controller is suitable. An enclosure of Tube is used to package the PMIC. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching'sVoltages 4.5V~28V are the dc control's supply voltage and operating voltage, respectively. Workable in an dc switcher where -40°C~85°C TA is the -40°C~85°C TArm. The switching controller can be switched at 200kHz~1MHz. The Surface Mount allows it to be used for dc dc regulator in general. DCDC regulator is controlled efficiently by Current Limit, Enable, Frequency Control, Power Good, Soft Start. Thare switch converters are connected to an analog integrated circuit (IC) of type SWITCHING CONTROLLER. Switching converters are designed with the terminal (s) at position DUAL . Different dc switching's functions can be applied to 24 terminations. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. 12V nominal DC switcher's voltage input. MAX8650 can be used to locate other relevant dc to dc converter ics. The switching converter has a total of 24 pins. Switching converter is a type of Switching Regulator or Controllers in particular. 4.5V should be the minimum input voltage for the dc dc voltage regulator. Statistically, the DC regulator outputs 5.5V voltage. It should be noted that the dc to dc regulator only accepts 28V voltage as input voltage. The dc dc regulator's usual output current is 25A, which should be noted down when you start a project. DC switcher's Surface Mount qualifies it for most applications and prototypes. 1.2MHz is the maximum frequency of this dc regulators.
MAX8650EEG+ Features
Transistor Driver Outputs
Switching Frequency: 200kHz~1MHz
Current Limit, Enable, Frequency Control, Power Good, Soft Start
PULSE WIDTH MODULATION
MAX8650EEG+ Applications
There are a lot of Maxim Integrated MAX8650EEG+ DC to DC converter applications.
- Various precision measuring instruments
- Elevator lighting
- Photovoltaic power
- Energy management systems
- Fire elevators
- Servo drive system
- Digital precision reference circuits
- Lathes
- Constant current circuits
- Industrial controllers
