MAX865EUA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1998 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Subcategory | Other Analog ICs |
| Max Power Dissipation | 330mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX865 |
| Function | Ratiometric |
| Number of Outputs | 2 |
| Output Voltage | 12V |
| Output Type | Fixed |
| Voltage - Output 1 | 12V |
| Input Voltage-Nom | 5V |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 1.5V |
| Analog IC - Other Type | SWITCHED CAPACITOR CONVERTER |
| Nominal Supply Current | 600μA |
| Output Configuration | Positive or Negative |
| Output Power | 330mW |
| Max Output Voltage | 12V |
| Voltage - Output 2 | 12V |
| Voltage - Output (Min/Fixed) | -Vin 2Vin |
| Topology | Charge Pump |
| Logic Function | Inverting |
| Frequency - Switching | 18kHz~34kHz |
| Supply Current-Max (Isup) | 1.15mA |
| Current - Output 1 | 20mA |
| Synchronous Rectifier | No |
| Min Output Voltage | 3V |
| Switcher Configuration | DOUBLER INVERTER |
| Max Duty Cycle | 50 % |
| Current - Output 2 | 20mA |
| Height | 1.1mm |
| Length | 3.05mm |
| Width | 3.05mm |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX865EUA+ Overview
There is an optimized performance in this voltage regulator because it utilizes the Tube package. Throughout this voltage regulator, there are 8 terminations. As a matter of fact, the type of analog IC that this voltage regulator 12v is equipped with is called SWITCHED CAPACITOR CONVERTER. Space savings are achieved by placing this voltage regulator in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package. The voltage regulator 12v has 2 outputs. Fixed outputs are generated on the output pins of this adjusting voltage regulator. There is a switching regulator that is compatible with the Surface Mount mounting. When operating, adjusting voltage regulator's operating temperature should be kept at -40°C~85°C TA. This DC-DC switching regulator has a switching frequency of 18kHz~34kHz. The output voltage of this voltage regulator (Min/Fixed) amounts to -Vin 2Vin volts. This voltage regulator's peak reflow temperature is so high as to make it virtually indestructible. To meet the operation requirements, voltage regulator is designed to provide 5V as the nominal input voltage. The regulator voltage that you are looking at belongs to the subcategory Other Analog ICs. As part of the MAX865 series of regulators, the voltage regulators can be found. A voltage of 12V volts can be generated by DC DC switching regulator. 8 pins are used for switching regulator operation. In order to use this voltage regulator 12v at its full potential, the output voltage should be kept at at least 3V. A maximum voltage of 12V can be obtained from the regulator voltage. A dc to dc voltage regulator's dc to dc voltage regulator's minimum supply voltage of 1.5V V ensures reliable performance. DC DC switching regulator can be operated from a voltage of 6V as its maximum supply voltage.
MAX865EUA+ Features
2 outputs
Peak reflow temperature (Cel) of 260
8 pins
MAX865EUA+ Applications
There are a lot of Maxim Integrated MAX865EUA+ Voltage Regulators applications.
- Series voltage regulation circuits
- Gear/thread machining machines
- CMM
- Hydrogen power
- Servo drive system
- Surge protection circuits
- Precision electronic equipment
- Ball screw pair
- Alternators
- Correction machines
