MAX869LEEE+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1997 |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 90mOhm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 667mW |
| Technology | MOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.635mm |
| Base Part Number | MAX869 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 2.4A |
| Operating Supply Voltage | 5.5V |
| Power Supplies | 3/5V |
| Interface | On/Off |
| Current - Output (Max) | 2A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 30 μs |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 300 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Adjustable), Over Temperature |
| Output Peak Current Limit-Nom | 2A |
| Rds On (Typ) | 38m Ω |
| Built-in Protections | OVER CURRENT; THERMAL |
| Output Current Flow Direction | SOURCE |
| Length | 4.89mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX869LEEE+ Overview
The LED driver's packaged as a Tube.The 16-SSOP (0.154, 3.90mm Width) package contains it.Surface Mount is the mounting type of the LED driver.This switch is of type General Purpose.To ensure reliable operation, set the temperature to -40°C~85°C TA.There are 1 outputs available on this lighting driver.With a supply voltage of Not Required, the LED driving board operates.Voltage output is P-Channel volts at maximum.There are Status Flag features available on the LED driving board.It belongs to the family MAX869.It contains 16 terminations.For operation, 16 pins are used.It is important to note that the LED driving board has 1 functions.The LED driver output is limited to 2AV.The maximum output current drops to 2.4A in order to meet the operation criteria.It is mounted in the way of Surface Mount.16 pins are equipped with it.It has a resistance of 90mOhm.The LED driver is packaged in an econtainer with a capacity of Peripheral Drivers.This part is powered by 3/5V.It is recommended to set the supply voltage to 5.5V for optimum efficiency.The maximum input voltage of the LED driver is 5.5V volts.The input voltage minimum is 2.7V volts.
MAX869LEEE+ Features
Resistance of 90mOhm
MAX869LEEE+ Applications
There are a lot of Maxim Integrated MAX869LEEE+ Power Switches ICs applications.
- HDD, SSD
- Portable GPS
- USB Ports/Hubs
- Wearable Devices
- Wireless/Networking Cards
- Telecom and Network Systems
- Portable Music Players
- Set-top-box
- Storage (HDDs, SSDs)
- Mobile Communication Devices
