Parameters |
Factory Lead Time |
1 Week |
Contact Plating |
Tin |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-SSOP (0.154, 3.90mm Width) |
Number of Pins |
16 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
Published |
1997 |
JESD-609 Code |
e3 |
Feature |
Status Flag |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Resistance |
90mOhm |
Subcategory |
Peripheral Drivers |
Max Power Dissipation |
667mW |
Technology |
MOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Terminal Pitch |
0.635mm |
Base Part Number |
MAX869 |
Pin Count |
16 |
Number of Outputs |
1 |
Output Type |
P-Channel |
Max Output Current |
2.4A |
Operating Supply Voltage |
5.5V |
Power Supplies |
3/5V |
Interface |
On/Off |
Current - Output (Max) |
2A |
Output Configuration |
High Side |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Input Type |
Non-Inverting |
Turn On Delay Time |
30 μs |
Switch Type |
General Purpose |
Min Input Voltage |
2.7V |
Max Input Voltage |
5.5V |
Turn-Off Delay Time |
300 μs |
Ratio - Input:Output |
1:1 |
Voltage - Load |
2.7V~5.5V |
Driver Number of Bits |
1 |
Fault Protection |
Current Limiting (Adjustable), Over Temperature |
Output Peak Current Limit-Nom |
2A |
Rds On (Typ) |
38m Ω |
Built-in Protections |
OVER CURRENT; THERMAL |
Length |
4.89mm |
Width |
3.9mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
MAX869LEEE+T Overview
As you can see, it's packaged in the way of a Tape & Reel (TR).This file is included in package 16-SSOP (0.154, 3.90mm Width).This lighting drivere has a mounting type of Surface Mount.There is a General Purpose switch type associated with it.In order to guarantee reliable performance, the temperature should be set to -40°C~85°C TA.The LED driver has a total of 1 outputs.The LED driving board operates at Not Required volts.A maximum voltage of P-Channel volts is available from the output of this LED driver.Features of the lighting driver are Status Flag.There is a MAX869 family of things that it belongs to.As a result, there are 16 terminations.The operation is carried out using the 16 pins.As far as the lighting driver is concerned, there are 1 functions.This lighting driver is capable of delivering a maximum output of 2A volts.The maximum output current drops to 2.4A in order to meet the operation criteria.Surface Mount is mounted in the way of this LED driving board.A total of 16 pins are present on it.It has 90mOhm resistance.A self-contained econtainer holding Peripheral Drivers capacity contains this lighting driver.This part's power supply is 3/5V.When using this LED driving board, it is recommended that the supply voltage is set to 5.5V.This LED driver can handle voltages up to 5.5V volts.It has a 2.7V volt minimum input voltage.
MAX869LEEE+T Features
Resistance of 90mOhm
MAX869LEEE+T Applications
There are a lot of Maxim Integrated MAX869LEEE+T Power Switches ICs applications.
- Smartphone and PDA
- Hot Swaps
- Portable Music Players
- Portable/Handheld Devices
- Portable Devices
- Wireless/Networking Cards
- Handheld Devices
- Gaming
- Wireless Modem Data Cards
- Telecom and Network Systems