MAX8702ETP+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-WFQFN Exposed Pad |
| Number of Pins | 20 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | TIN |
| Max Power Dissipation | 1.35W |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~28V |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX8702 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Max Output Current | 5A |
| Operating Supply Voltage | 5V |
| Nominal Supply Current | 400μA |
| Output Current | 5A |
| Input Type | Non-Inverting |
| Rise Time | 11ns |
| Fall Time (Typ) | 8 ns |
| Rise / Fall Time (Typ) | 16ns 14ns |
| Channel Type | Synchronous |
| Number of Drivers | 4 |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.5A 1.5A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Height Seated (Max) | 0.8mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX8702ETP+T Overview
Its 20-WFQFN Exposed Pad package provides greater flexibility.A package of Tape & Reel (TR) has been used.The configuration is supported by 4 drivers.It's mounted on the way to Surface Mount.In the absence of a power supply voltage of 4.5V~28V V, it is able to demonstrate its superiority.Gate drivers is designed wGate driversh a gate type of N-Channel MOSFET.This device can operate at temperatures up to -40°C~150°C TJ.A type of Non-Inverting is used for input in this program.The configuration is based on 20 terminations.There are numerous related parts listed under its base part number MAX8702.The mount method is Surface Mount.The pins are configured with 20 when designing the chip.With a supply voltage of 5V, it is designed to operate.In the maximum case, the output current can be limited to 5A.On the board, there are 20 component pins.Mosfet gate drivers can deliver a current of 5A.Considering its maximum power dissipation, 1.35W shows its maximum capacity to transfer and conduct power loss without overheating.During the operation of the system, the voltage of the operating supply should be set to 5V.
MAX8702ETP+T Features
Embedded in the Tape & Reel (TR) package
4 drivers
Employing a gate type of N-Channel MOSFET
20 pins
Maximum power dissipation of 1.35W
MAX8702ETP+T Applications
There are a lot of Maxim Integrated MAX8702ETP+T gate drivers applications.
- PCMCIA applications
- Automotive Applications
- A/D drivers
- Power factor correction (PFC) circuits
- Multicolor LED/laser displays
- Commercial and agricultural vehicles (CAV)
- Telecom switch mode power supplies
- Industrial motor drives - compact, standard, premium, servo drives
- Isolated switch mode power supplies (SMPS)
- Active Clamp Flyback or Forward and Synchronous Rectifier
