MAX8731AETI+
| Parameters | |
|---|---|
| Fault Protection | Over Current, Short Circuit |
| Battery Chemistry | Multi-Chemistry |
| Number of Cells | 1 ~ 4 |
| Current - Charging | Constant - Programmable |
| Charge Current - Max | 8A |
| Battery Pack Voltage | 16.8V |
| Height Seated (Max) | 0.8mm |
| Length | 5mm |
| Width | 5mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-WFQFN Exposed Pad |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Power Management Circuits |
| Technology | BICMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | MAX8731 |
| Pin Count | 28 |
| Output Voltage | 5.4V |
| Operating Supply Voltage | 26V |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Number of Channels | 1 |
| Interface | I2C |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Operating Supply Current | 2μA |
| Adjustable Threshold | YES |
| Nominal Input Voltage | 26V |
MAX8731AETI+ Overview
It is included in the Tube package. There is currently a package available named 28-WFQFN Exposed Pad.Device mounting type Surface Mount is specified.Setting the temperature to -40°C~85°C TA is the right thing to do.To operate the device, an analog IC called POWER SUPPLY SUPPORT CIRCUIT is used.To charge the device, you will need to supply it with Constant - Programmable of current.Identify its related parts based on the base part number MAX8731.As you can see, it has 28 terminations in it.In the battery pack, the voltage is 16.8V.28 pins are attached to it.As long as it is charged at maximum current, it will be rated as 8A.The product is able to function with the help of 28 pins that are required.The number of channels available is 1.The battery would need to have a voltage of 3.3V for the device to work.It is possible to achieve optimum efficiency in the case of a given output voltage of 5.4V.There is one subcategory of this device, and it is Power Management Circuits.It is mounted in the manner of Surface Mount.A power supply setting of 0 has been assigned to the part.This gadget's power supply has a current of 2μA flowing through it.The best efficiency can be achieved by setting the supply voltage to 26V.If the supply voltage (Vsup) is kept above 2.7V, the device will be able to operate normally.
MAX8731AETI+ Features
Battery pack voltage of 16.8V
1 channels
Power Management Circuits subcategory
28-WFQFN Exposed Pad package
MAX8731AETI+ Applications
There are a lot of Maxim Integrated MAX8731AETI+ Battery Chargers ICs applications.
- Rental fleets
- Boat
- Solar charging
- GPS portable devices
- Portable medical equipment
- Smart power strips
- Power tools
- Ruggedized notebooks/tablet computers
- Various chargers
- Instruments and meters
