MAX8790AETP+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-WFQFN Exposed Pad |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | DC DC Controller |
| Terminal Finish | Matte Tin (Sn) |
| Applications | Backlight |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Max Power Dissipation | 1.349W |
| Technology | BICMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | MAX8790 |
| Pin Count | 20 |
| Number of Outputs | 6 |
| Output Voltage | 5.3V |
| Power Supplies | 12V |
| Max Supply Voltage | 26V |
| Min Supply Voltage | 4.5V |
| Power Dissipation | 1.349W |
| Output Current | 27mA |
| Max Supply Current | 2mA |
| Topology | Step-Up (Boost) |
| Min Input Voltage | 4.5V |
| Max Input Voltage | 26V |
| Internal Switch(s) | No |
| fmax-Min | 0.9 MHz |
| Dimming | Analog, PWM |
| Number of Segments | 35 |
| Switching Frequency | 1MHz |
| Multiplexed Display Capability | NO |
| Height | 750μm |
| Length | 4.1mm |
| Width | 4.1mm |
| RoHS Status | ROHS3 Compliant |
MAX8790AETP+ Overview
The 20-WFQFN Exposed Pad package conserves board space. The LED driver's design uses 6 outputs.For mounting, it uses the Surface Mount method.Initially, it emerges as a DC DC Controller with high efficiency and a high degree of reliability.It is possible for the led driver ic to function normally at -40°C~85°C TA.Backlight has many advantages.For its operation, 20 terminations are designed.The LED light driver is configured with a base of 0 pins.The segment count is 35.Surface Mount has been mounted with the device.Under the base part number MAX8790, you'll find this LED driver.It is acceptable to supply voltages of 26V volts.On it, there are 20 pins.According to its characteristics, it is also categorized into Display Drivers.A minimal input voltage of 4.5V is required for it to operate.The maximum efficiency can be achieved by operating it at a minimal voltage of 4.5V.Supply current cannot exceed 26V.When the maximum supply current is less than 2mA, this device is able to provide high efficiency.Loads can only be powered by 27mA current.It's possible for this electronic component to fully function when the switching frequency is maintained at 1MHz.Currently, it is generating 5.3V voltage.
MAX8790AETP+ Features
Available in the 20-WFQFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Supply voltage of 5V
Switching frequency of 1MHz
Output voltage of 5.3V
MAX8790AETP+ Applications
There are a lot of Maxim Integrated MAX8790AETP+ LED Driver ICs applications.
- Refrigeration lighting
- Scanners and Handy Terminals
- Flicker-free LED Lighting using R1580N
- LED Lightings for Inspection Devices
- Auxiliary lights for on-vehicle cameras
- Amusement Machines
- Portable lighting
- Down lighting
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- Linear fluorescent
