MAX8790ETP+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-WFQFN Exposed Pad |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | DC DC Controller |
| Terminal Finish | Matte Tin (Sn) |
| Applications | Backlight |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Max Power Dissipation | 1.349W |
| Technology | BICMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | MAX8790 |
| Pin Count | 20 |
| Number of Outputs | 6 |
| Output Voltage | 5.3V |
| Power Supplies | 12V |
| Max Supply Voltage | 26V |
| Min Supply Voltage | 4.5V |
| Power Dissipation | 1.349W |
| Output Current | 25mA |
| Max Supply Current | 2mA |
| Topology | Step-Up (Boost) |
| Min Input Voltage | 4.5V |
| Max Input Voltage | 26V |
| Internal Switch(s) | No |
| High Level Output Current | 1A |
| Low Level Output Current | 1A |
| fmax-Min | 0.9 MHz |
| Dimming | Analog, PWM |
| Number of Segments | 6 |
| Switching Frequency | 1MHz |
| Multiplexed Display Capability | NO |
| Height | 730μm |
| Length | 4mm |
| Width | 4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX8790ETP+ Overview
Using its 20-WFQFN Exposed Pad package, it is possible to save board space. LED drivers are designed with 6 outputs.The mounting method adopted is Surface Mount.With high reliability and efficiency, this emerges as a DC DC Controller.LED drivers capable of operating at -40°C~85°C TA can be used.There are many benefits for Backlight.For its operation, terminations with a value of 0 are used.It has a base of 20 pins.There are 6 segments.Surface Mount is mounted on it.A base part number of MAX8790 is associated with this LED driver.There is no maximum value acceptable for the supply voltage, so 26V is acceptable.20 pins are included in it.Further, it can be classified as Display Drivers based on its characteristics.A voltage of 4.5V is its minimal input voltage.In order to achieve the highest efficiency, it is designed to operate at a low voltage of 4.5V.In terms of supply current, there is a maximum value of 26V.When the maximum supply current is below 2mA, it is capable of delivering high efficiency.The current that can be supplied to the load is 25mA.It's possible for this electronic component to fully function when the switching frequency is maintained at 1MHz.This device has a voltage output of 5.3V volts.
MAX8790ETP+ Features
Available in the 20-WFQFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Supply voltage of 5V
Switching frequency of 1MHz
Output voltage of 5.3V
MAX8790ETP+ Applications
There are a lot of Maxim Integrated MAX8790ETP+ LED Driver ICs applications.
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- General lighting
- Sports Facility Lighting
- Architectural lighting
- Panel lighting
- LED Lightings for Industrial Equipment
- Industrial LED Lighting: Image Recognition Devices
- Auxiliary lights for on-vehicle cameras
- LED headlights
- Power source for accessories such as car audios, car navigation systems, and ETC systems
