MAX8830EWE+T
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-WFBGA, CSPBGA |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Applications | Backlight, Camera Flash |
| Additional Feature | WITH ONE FLASH LED |
| Subcategory | Display Drivers |
| Max Power Dissipation | 750mW |
| Technology | BICMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Frequency | 1MHz |
| Base Part Number | MAX8830 |
| Pin Count | 16 |
| Number of Outputs | 5 |
| Operating Supply Voltage | 3.6V |
| Voltage - Output | 3.8V~5.2V |
| Topology | Step-Up (Boost) |
| Current - Output / Channel | 10mA 320mA Flash |
| Internal Switch(s) | Yes |
| Dimming | I2C |
| Supply Voltage1-Nom | 3.6V |
| Number of Segments | 4 |
| Voltage - Supply (Max) | 5.5V |
| Voltage - Supply (Min) | 2.7V |
| Multiplexed Display Capability | NO |
| Data Input Mode | SERIAL |
| Height Seated (Max) | 0.67mm |
| Length | 2.02mm |
| Width | 2.02mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MAX8830EWE+T Overview
In order to save board space, the led driver uses the 16-WFBGA, CSPBGA package. Typically, LED drivers have 5 outputs.It is possible to mount the led driver using Surface Mount.The system emerges as a DC DC Regulator with high efficiency.It is able to work normally at the operating temperature of -40°C~85°C TA.There are many benefits for Backlight, Camera Flash.It operates based on the frequency of 1MHz.In order for it to operate, it has 16 terminations.There are 16 pins used to form the base of its configuration.A voltage supply less than 2.7V could result in undetermined failures.In total, it includes 4 segments.It has been mounted on Surface Mount.It is under the base part number MAX8830 that you can find this LED driver.3.8V~5.2V is the output voltage.A device with 16 pins is available.As a result, it is designed to be able to deliver a maximum voltage of 5.5V.The Display Drivers is also assigned based on its characteristics.Powering systems requires 3.6V voltages.A further characteristic of this LED driver is that it is WITH ONE FLASH LED.
MAX8830EWE+T Features
Available in the 16-WFBGA, CSPBGA package
Operating temperature of -40°C~85°C TA
Frequency of 1MHz
Supply voltage of 3V
Operating with the supply voltage of 3.6V
WITH ONE FLASH LED
MAX8830EWE+T Applications
There are a lot of Maxim Integrated MAX8830EWE+T LED Driver ICs applications.
- Stage and Studio lighting
- Gallery lighting
- LED Lightings for Inspection Devices
- LED backlight driver for LCD displays for Tablets and Note PCs
- Down lights
- Amusement Machines
- Flicker-free LED Lighting using R1580N
- Panel lighting
- Portable lighting
- LED headlights
