MAX8879ETG+
| Parameters | |
|---|---|
| Height Seated (Max) | 0.8mm |
| Length | 4mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-WFQFN Exposed Pad |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2010 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Applications | Backlight, Camera Flash |
| HTS Code | 8542.39.00.01 |
| Technology | BICMOS |
| Terminal Position | QUAD |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Frequency | 1MHz |
| Base Part Number | MAX8879 |
| Pin Count | 24 |
| Number of Outputs | 11 |
| Output Voltage | 11V |
| Power Dissipation | 1.666W |
| Output Current | 610mA |
| Max Supply Current | 6.5mA |
| Topology | Switched Capacitor (Charge Pump) |
| Current - Output / Channel | 30mA 100mA Flash |
| Internal Switch(s) | Yes |
| fmax-Min | 0.4 MHz |
| Dimming | I2C |
| Supply Voltage1-Nom | 3.6V |
| Number of Segments | 11 |
| Voltage - Supply (Max) | 5.5V |
| Voltage - Supply (Min) | 2.7V |
| Multiplexed Display Capability | NO |
| Data Input Mode | SERIAL |
MAX8879ETG+ Overview
In order to save board space, the 24-WFQFN Exposed Pad package is used. LED drivers designed using this technology use 11 outputs.The led light driver is mounted using Surface Mount.In this case, the DC DC Regulator emerges as highly efficient and reliable.-40°C~85°C TA is a valid operating temperature for the led driver.The benefits of Backlight, Camera Flash are considerable.Frequency 1MHz is the basis of operation.It operates using 24 terminations.There are 24 pins on its base.If the voltage supply is below 2.7V, undetermined failures may occur.Based on our estimates, there are 11 segments.It has been mounted on Surface Mount.The LED driver can be found under the base part number MAX8879.The device has 24 pins.It is designed to support a maximum value of 5.5V.If the maximum supply current is less than 6.5mA, the device is capable of providing high efficiency.It is possible to supply the load with 610mA current.A 11V voltage is output by it.
MAX8879ETG+ Features
Available in the 24-WFQFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Frequency of 1MHz
Supply voltage of 1.8V
Output voltage of 11V
MAX8879ETG+ Applications
There are a lot of Maxim Integrated MAX8879ETG+ LED Driver ICs applications.
- Amusement Machines
- OLED power supply for portable equipment
- Stage and Studio lighting
- White LED Backlight for portable equipment
- Constant Voltage Power Source for portable equipment
- Down lighting
- Street lighting
- Scanners and Handy Terminals
- LED backlight driver for LCD displays for Tablets and Note PCs
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
