MAX889RESA+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2000 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Other Analog ICs |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Base Part Number | MAX889 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Voltage - Input (Max) | 5.5V |
| Output Voltage | -5.5V |
| Output Type | Adjustable |
| Voltage - Input (Min) | 2.7V |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHED CAPACITOR REGULATOR |
| Output Configuration | Negative |
| Current - Output | 200mA |
| Max Output Voltage | -5.5V |
| Voltage - Output (Min/Fixed) | -2.5V |
| Topology | Charge Pump |
| Logic Function | Inverting |
| Frequency - Switching | 500kHz |
| Synchronous Rectifier | No |
| Min Output Voltage | -2.5V |
| Switcher Configuration | DOUBLER INVERTER |
| Length | 4.9mm |
| Width | 4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX889RESA+T Overview
It uses the Tape & Reel (TR) package in order to optimize the performance of this voltage regulator. There are 8 terminations in this harley voltage regulator. There are two types of analog ICs in this voltage regulator 12v: SWITCHED CAPACITOR REGULATOR ICs, which are the ones used in older voltage regulator 12vs. Space-saving 8-SOIC (0.154, 3.90mm Width) packages are available for this harley voltage regulator. The voltage regulator 12v has 1 outputs. As you can see, this DC DC switching regulator generates Adjustable output on its output pins. This switching regulator is designed to fit the Surface Mount mounting system. -40°C~85°C TA should be the operating temperature when voltage regulator is operating. In this voltage regulator 12v, the switching frequency is 500kHz. The voltage regulator can be operated with a voltage as low as 2.7V as an input voltage. In this adjusting voltage regulator, the output voltage (Min/Fixed) equates to -2.5V. DC DC switching regulator's 200mA output current allows for maximum design flexibility. There is a voltage regulator maximum input voltage of 5.5V. Due to its 260 high peak reflow temperature, this voltage regulator 12v is virtually indestructible. For operation, voltage regulator provides a nominal input voltage of 5V. DC DC switching regulator is part of the Other Analog ICs subcategory and can be found in the Other Analog ICs category. There is a DC/DC regulator in this family that belongs to the MAX889 family. There is a possibility that DC DC switching regulator can give voltage at -5.5V volts. 8 pins are used for switching regulator operation. The output voltage of this voltage regulator 12v should at least be set at -2.5V volts at all times. It provides the adjusting voltage regulator's maximal output voltage of -5.5V.
MAX889RESA+T Features
1 outputs
Peak reflow temperature (Cel) of 260
8 pins
MAX889RESA+T Applications
There are a lot of Maxim Integrated MAX889RESA+T Voltage Regulators applications.
- Smart grid
- Gear/thread machining machines
- Solar power plants
- Terrestrial set-top boxes
- Electrical distribution systems
- Fire elevators
- Low output voltage switching power supply circuits
- Domestic water pumps
- USB circuits
- Access control systems
