MAX8901BETA+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-WFDFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Matte Tin (Sn) |
| Applications | Backlight |
| Subcategory | Display Drivers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.5mm |
| Base Part Number | MAX8901 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Efficiency | 91 % |
| Power Supplies | 3.6V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.6V |
| Power Dissipation | 953mW |
| Output Current | 24.75mA |
| Max Supply Current | 185μA |
| Max Output Voltage | 25V |
| Voltage - Output | 26V |
| Topology | Step-Up (Boost) |
| Min Input Voltage | 2.6V |
| Max Input Voltage | 5.5V |
| Current - Output / Channel | 25mA |
| Internal Switch(s) | Yes |
| Dimming | Single-Wire |
| Number of Segments | 6 |
| Switching Frequency | 750kHz |
| Multiplexed Display Capability | NO |
| Length | 2mm |
| Width | 2mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
MAX8901BETA+T Overview
8-WFDFN Exposed Pad saves board space. In LED drivers, the outputs are all set to 1.For mounting, it uses the Surface Mount method.As a DC DC Regulator, it has high efficiency and reliability.-40°C~85°C TA is a valid operating temperature for the led driver.A number of benefits are available to Backlight.In this case, the termination value is 8.There are 8 pins used to form the base of its configuration.A total of 6 segments have been created.It is mounted in the way of Surface Mount.The base part number for this LED driver is MAX8901.It is acceptable to operate with a supply voltage of 5.5V.A voltage of 26V is produced by it.The device has a pin count of 8.As a result, its characteristics can also be categorized as Display Drivers.This device requires a minimum input voltage of 2.6V.It works with the minimal supply voltage of 2.6V to meet highest efficiency standards.5.5V is the maximum value of supply current that can be used.As long as the maximum supply current is under 185μA, it can deliver high efficiency.24.75mA is the maximum current the load can handle.The electronic component can fully perform its functions if the switching frequency is maintained at 750kHz.It is important to keep the output voltage below 25V.
MAX8901BETA+T Features
Available in the 8-WFDFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Supply voltage of 3.6V
Switching frequency of 750kHz
MAX8901BETA+T Applications
There are a lot of Maxim Integrated MAX8901BETA+T LED Driver ICs applications.
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- Linear fluorescent
- LED headlights
- Amusement Machines
- OLED power supply for portable equipment
- A- lamps
- Refrigeration lighting
- Stage Lighting and Signage
- LED Lightings for Industrial Equipment
- Panel lighting
