MAX890LESA+T
| Parameters | |
|---|---|
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Adjustable), Over Temperature |
| Rds On (Typ) | 75m Ω |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 90mOhm |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Base Part Number | MAX890 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 5V |
| Output Type | P-Channel |
| Max Output Current | 1.2A |
| Operating Supply Voltage | 5.5V |
| Input Voltage-Nom | 3V |
| Interface | On/Off |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Supply Current-Max (Isup) | 0.05mA |
| Nominal Input Voltage | 5.5V |
| Switcher Configuration | SINGLE |
MAX890LESA+T Overview
It is package in Tape & Reel (TR) case.The 8-SOIC (0.154, 3.90mm Width) package contains it.Mounting type Surface Mount is selected for the LED driving board.A General Purpose switch type is owned by it.To ensure reliable operation, set the temperature to -40°C~85°C TA.The LED driver has 1 outputs.Operation is based on Not Required supply voltage.A maximum output voltage of P-Channel volts can be obtained with this LED driver.Currently, the LED driving board is equipped with Status Flag features.The MAX890 family contains this object.A total of 8 terminations can be found in it.In order to operate, 8 pins are used.It consists of 1 functions.To meet the operation criteria, the maximum output current drops to 1.2A.It is mounted in the way of Surface Mount.As a result, it has a total of 8 pins.90mOhm is the resistance of the lighting driver.In this case, the analog IC is SWITCHING REGULATOR.In order to maximize efficiency, the supply voltage should be set to 5.5V.The maximum input voltage of the LED driver is 5.5V volts.The minimum input voltage is 2.7V volts.Its maximum supply current for operation is 0.05mA.
MAX890LESA+T Features
Resistance of 90mOhm
MAX890LESA+T Applications
There are a lot of Maxim Integrated MAX890LESA+T Power Switches ICs applications.
- Gaming
- USB Protection
- Wireless Modem Data Cards
- Set-top-box
- Solid-State Drives
- Portable GPS Device
- Portable Music Players
- Hard Disk Drives
- Smart Phones, Feature Phones
- Storage Drives
