MAX891LEUA+
| Parameters | |
|---|---|
| Rds On (Typ) | 120m Ω |
| Drain to Source Resistance | 120mOhm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1997 |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX891 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Voltage | 6.3V |
| Output Type | P-Channel |
| Interface | On/Off |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | High Side |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Control Mode | CURRENT-MODE |
| Control Technique | PULSE WIDTH MODULATION |
| Supply Current-Max (Isup) | 0.05mA |
| Nominal Input Voltage | 5.5V |
| Switcher Configuration | BUCK |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Adjustable), Over Temperature |
MAX891LEUA+ Overview
It's?packaged?in?the way?of?a?Tube.There is a package for it in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package.It has been mounted as Surface Mount on the LED driver.The switch type of this switch is General Purpose.To ensure reliable performance, the temperature should be set to -40°C~85°C TA.The lighting driver is equipped with 1 outputs that can be used.It uses a supply voltage of Not Required to operate.The maximum output voltage is P-Channel volts.Currently, the LED driving board is equipped with Status Flag features.It belongs to the family MAX891.The termination count is 8.It is necessary to use the 8 pins in order to operate the LED driver.It is important to note that the LED driving board has 1 functions.This LED driver is equipped with a total of 8 pins.This results in a 500mA output current.In this case, the analog IC is SWITCHING REGULATOR.It operates at a maximum supply current of 0.05mA.
MAX891LEUA+ Features
MAX891LEUA+ Applications
There are a lot of Maxim Integrated MAX891LEUA+ Power Switches ICs applications.
- Wireless/Networking Cards
- Portable Video Game Players
- Set-Top Boxes
- USB Power Distribution
- Portable Devices
- USB Ports/Hubs
- Storage Drives
- Hot Swap
- Storage (HDDs, SSDs)
- Hot-Swap Systems
