MAX891LEUA+T
| Parameters | |
|---|---|
| Fault Protection | Current Limiting (Adjustable), Over Temperature |
| Rds On (Typ) | 120m Ω |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 1997 |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 120mOhm |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 330mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX891 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 500mA |
| Operating Supply Voltage | 5.5V |
| Interface | On/Off |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 200 μs |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Control Mode | CURRENT-MODE |
| Max Input Voltage | 5.5V |
| Output Current per Channel | 500mA |
| Control Technique | PULSE WIDTH MODULATION |
| Supply Current-Max (Isup) | 0.05mA |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 20 μs |
| Switcher Configuration | BUCK |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
MAX891LEUA+T Overview
The package is in the form of a Tape & Reel (TR).It's included in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package.It has been mounted as Surface Mount on the LED driver.The switch type is General Purpose.In order to guarantee reliable performance, the temperature should be set to -40°C~85°C TA.The LED driver is equipped with 1 outputs.A voltage of Not Required is used to power it.There is a maximum output voltage of P-Channel volts.There are Status Flag features available on the LED driving board.It belongs to the family MAX891.A total of 8 terminations have been found in it.For operation, we use the 8 pins.It contains 1 functions.To comply with the operation criteria, the maximum output current is reduced to 500mA.Surface Mount is mounted in the way of this LED driving board.It is equipped with a total of 8 pins.120mOhm resistance is present in the lighting driver.The gadget uses an analog IC, which is SWITCHING REGULATOR in this case.It is recommended to set the supply voltage to 5.5V for optimum efficiency.There is a maximum input voltage of 5.5V volts.The input voltage minimum is 2.7V volts.For operation, it can supply a maximum current of 0.05mA.
MAX891LEUA+T Features
Resistance of 120mOhm
MAX891LEUA+T Applications
There are a lot of Maxim Integrated MAX891LEUA+T Power Switches ICs applications.
- Hot Swaps
- Telecom and Network Systems
- Hot Swap
- USB3.1 Power Delivery
- Wireless Modem Data Cards
- Smart Phones, Feature Phones
- Storage Drives
- Mobile Communication Devices
- Gaming
- Portable/Handheld Devices
