MAX894LESA+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 300mOhm |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Base Part Number | MAX894 |
| Pin Count | 8 |
| JESD-30 Code | R-PDSO-G8 |
| Number of Outputs | 2 |
| Output Voltage | 5V |
| Output Type | P-Channel |
| Operating Supply Voltage | 5.5V |
| Input Voltage-Nom | 5V |
| Interface | On/Off |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Current - Output (Max) | 500mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 200 μs |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Number of Inputs | 1 |
| Max Input Voltage | 5.5V |
| Supply Current-Max (Isup) | 0.05mA |
| Turn-Off Delay Time | 20 μs |
| Switcher Configuration | BOOST |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Adjustable), Over Temperature |
| Rds On (Typ) | 120m Ω |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX894LESA+T Overview
Tape & Reel (TR) is how it's packaged.This package is included in 8-SOIC (0.154, 3.90mm Width).Surface Mount is the mounting type of the LED driver.There is a switch type of General Purpose.It is recommended that the temperature be set to -40°C~85°C TA for reliable performance.The LED driver has a total of 2 outputs.The LED driving board is powered by a voltage of Not Required.Voltage output is P-Channel volts at maximum.It is a member of the MAX894 family.It consists of 8 terminations in total.As far as functions are concerned, the lighting driver has 1.In this case, the LED driving board can produce only 500mAV as its maximum output.Surface Mount is mounted in the way.8 pins are connected to it in total.In this case, there is 300mOhm resistance in the LED driving board.There is an analog input IC in this gadget, which is DUAL SWITCHING CONTROLLER.In order to maximize efficiency, the supply voltage should be set to 5.5V.This LED driver can handle voltages up to 5.5V volts.There is a minimum input voltage of 2.7V volts.For operation, it can supply a maximum current of 0.05mA.1 inputs are provided.
MAX894LESA+T Features
Resistance of 300mOhm
MAX894LESA+T Applications
There are a lot of Maxim Integrated MAX894LESA+T Power Switches ICs applications.
- PC Card Hot Swap
- Portable/Handheld Devices
- Set-Top Boxes
- Notebook PC
- Hot Swaps
- Wearable Devices
- PC Cards
- Portable Video Game Players
- Storage (HDDs, SSDs)
- Low Voltage I/O System Power
