MAX895LESA+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 250mOhm |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Base Part Number | MAX895 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Voltage | 5V |
| Output Type | P-Channel |
| Max Output Current | 375mA |
| Operating Supply Voltage | 5.5V |
| Input Voltage-Nom | 5V |
| Interface | On/Off |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 200 μs |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Number of Inputs | 1 |
| Max Input Voltage | 5.5V |
| Output Current per Channel | 250mA |
| Supply Current-Max (Isup) | 0.05mA |
| Turn-Off Delay Time | 20 μs |
| Switcher Configuration | BOOST |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Adjustable), Over Temperature |
| Rds On (Typ) | 250m Ω |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX895LESA+T Overview
The LED driver's packaged as a Tape & Reel (TR).There is a package for it in the 8-SOIC (0.154, 3.90mm Width) package.The LED driver is mounted as Surface Mount.General Purpose is the switch type that it owns.It is recommended that the temperature be set to -40°C~85°C TA for reliable performance.In this LED driver, there are no outputs available.The LED driving board is powered by a voltage of Not Required.The maximum output voltage of this LED driver is P-Channel volts.It is a member of the MAX895 family.It consists of 8 terminations in total.For operation, 8 pins are used.Currently, the lighting driver has a total of 1 functions.As a result, the maximum output current is reduced to 375mA in order to meet the operation requirements.The LED driving board is mounted in the way of Surface Mount.The LED driving board is equipped with a total of 8 pins.It has a resistance of 250mOhm.This LED driving board uses an analog IC DUAL SWITCHING CONTROLLER.A supply voltage of 5.5V is recommended for maximum efficiency.Voltage input is limited to 5.5V volts.As far as input voltage goes, it has a minimum of 2.7V volts.For operation, it has a maximum supply current of 0.05mA.1 inputs are provided.
MAX895LESA+T Features
Resistance of 250mOhm
MAX895LESA+T Applications
There are a lot of Maxim Integrated MAX895LESA+T Power Switches ICs applications.
- Portable/Handheld Devices
- USB3.1 Power Delivery
- Hot-Swap Systems
- Telecom and Network Systems
- HDD and SSD
- Hard Disk Drives
- Hot Swap
- Wireless Modem Data Cards
- Handheld Devices
- Portable Video Game Players
