MAX9010EXT+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-TSSOP, SC-88, SOT-363 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2002 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Max Power Dissipation | 245mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | MAX9010 |
| Pin Count | 6 |
| Output Type | TTL |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Nominal Supply Current | 2.1mA |
| Output Current | 40mA |
| Max Supply Current | 2.1mA |
| Propagation Delay | 9 ns |
| Quiescent Current | 2.1mA |
| Common Mode Rejection Ratio | 82 dB |
| Voltage - Supply, Single/Dual (±) | 4.5V~5.5V |
| Input Offset Voltage (Vos) | 5mV |
| Voltage Gain | 69.54dB |
| Average Bias Current-Max (IIB) | 2μA |
| Power Supply Rejection Ratio (PSRR) | 82dB |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 500nA |
| Input Bias Current | 500nA |
| Voltage - Input Offset (Max) | 5mV @ 5.5V |
| Current - Input Bias (Max) | 0.5μA @ 5V |
| CMRR, PSRR (Typ) | 95dB CMRR, 82dB PSRR |
| Length | 2mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX9010EXT+T Overview
The product is packaged in 6-TSSOP, SC-88, SOT-363 to facilitate transportation.A comparator with an output type of TTL is being used.Ready for shipping in Tape & Reel (TR) package.The device is designed with 6 terminations.Electronic comparator is a component of the Comparator family.This comparator is capable of handling a wide range of tasks if it is supplied with a voltage of 5V .Electronic comparator can be classified as a General Purpose chip.The total number of elements is 1 .Electronic comparator includes 6 pins.Electronic comparator is recommended to mount using type Surface Mount .Ideally, the operating temperature should be set at -40°C~85°C in order to prevent malfunction.There are 6 pins on the comparator.Search MAX9010 to find more pin-to-pin solutions.As a result, this comparator displays a quiescent current of 2.1mA .This component has a Surface Mount mount for mounting to PCBs or other boards.Normally, the nominal supply current should be 2.1mA .Electronic comparator is possible for the comparator to malfunction if the current supply exceeds 2.1mA .Electronic comparator is possible to input up to 500nA current into the device.Comparator electronics is clear from the voltage formula that the voltage gain of the part is 69.54dB .The operating supply voltage for normal operation should be 5V .
MAX9010EXT+T Features
TTL output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 2.1mA
Voltage Gain: 69.54dB
MAX9010EXT+T Applications
There are a lot of Maxim Integrated MAX9010EXT+T linear comparators applications.
- Self-diagnostics
- Infotainment and Clusters
- Lithium ion battery monitoring
- High-Speed Differential Line Receiver
- General-Purpose Portable Devices
- Battery-Powered Electronics
- Automotive
- Set Top Boxes
- Battery-Powered Electronics
- Window Comparators, Multivibrators
