banner_page

MAX9012ESA+

Surface Mount Tube 40mA mA Linear Comparators 69.54dB dB 2μA pA 2002 4.2mA μA 3mV mV Surface Mount


  • Manufacturer: Maxim Integrated
  • Nocochips NO: 503-MAX9012ESA+
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 358
  • Description: Surface Mount Tube 40mA mA Linear Comparators 69.54dB dB 2μA pA 2002 4.2mA μA 3mV mV Surface Mount (Kg)

Details

Tags

Parameters
Current - Input Bias (Max) 0.5μA @ 5V
CMRR, PSRR (Typ) 95dB CMRR, 82dB PSRR
Height 1.5mm
Length 5mm
Width 4mm
Radiation Hardening No
REACH SVHC Unknown
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Number of Pins 8
Operating Temperature -40°C~85°C
Packaging Tube
Published 2002
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Type General Purpose
Terminal Finish Matte Tin (Sn)
Subcategory Comparator
Max Power Dissipation 471mW
Technology BIPOLAR
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 2
Supply Voltage 5V
Base Part Number MAX9012
Pin Count 8
Output Type TTL
Number of Elements 2
Nominal Supply Current 4.2mA
Output Current 40mA
Max Supply Current 4.2mA
Propagation Delay 9 ns
Quiescent Current 4.2mA
Common Mode Rejection Ratio 95 dB
Voltage - Supply, Single/Dual (±) 4.5V~5.5V
Input Offset Voltage (Vos) 3mV
Voltage Gain 69.54dB
Power Supply Rejection Ratio (PSRR) 82dB
Supply Voltage Limit-Max 6V
Max Input Current 500nA
Input Bias Current 2μA
Voltage - Input Offset (Max) 3mV @ 5.5V

MAX9012ESA+ Overview


In order to facilitate transportation, it is packaged in 8-SOIC (0.154, 3.90mm Width) .Output type TTL is used for this comparator.This device is designed in Tube case.There are8 terminals on the comparator.Electronic comparator is a component of the Comparator family.In the presence of a 5V voltage, the comparator is capable of accomplishing a variety of demanding tasks.The type of the chip can be classified as General Purpose .A total of 2 elements can be found in it.The pinout of the component starts from 8 pins it has.In general, mounting type Surface Mount is recommended.In order to avoid malfunctions, the operating temperature should be set to -40°C~85°C .There are 8 pins on the comparator.You can find more pin-to-pin solutions by searching MAX9012 .In this comparator, the quiescent current is 4.2mA .This component has a Surface Mount mount for mounting to PCBs or other boards.Electronic comparator is recommended that the nominal supply current for the device be set to 4.2mA .A supply current exceeding 4.2mA may result in the comparator malfunctioning.You can input a maximum current of 500nA into this device.Comparator electronics follows that the voltage gain of the part is 69.54dB .

MAX9012ESA+ Features


TTL output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 4.2mA
Voltage Gain: 69.54dB

MAX9012ESA+ Applications


There are a lot of Maxim Integrated MAX9012ESA+ linear comparators applications.

  • Automatic Test Equipment
  • Simple Analog-to-Digital Converters (ADCs)
  • High-Speed Sampling Circuits
  • Portable Battery Monitoring
  • Mobile Communications
  • Zero-Crossing Detectors
  • Point of load regulators
  • Consumer Medical Electronics
  • Wireless Base Stations
  • Metering Systems

Write a review

Note: HTML is not translated!
    Bad           Good