MAX9012ESA+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2002 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | MATTE TIN |
| Subcategory | Comparator |
| Max Power Dissipation | 471mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | MAX9012 |
| Pin Count | 8 |
| JESD-30 Code | R-PDSO-G8 |
| Output Type | TTL |
| Number of Elements | 2 |
| Nominal Supply Current | 4.2mA |
| Output Current | 40mA |
| Max Supply Current | 4.2mA |
| Propagation Delay | 9 ns |
| Quiescent Current | 4.2mA |
| Common Mode Rejection Ratio | 82 dB |
| Voltage - Supply, Single/Dual (±) | 4.5V~5.5V |
| Input Offset Voltage (Vos) | 3mV |
| Voltage Gain | 69.54dB |
| Supply Voltage Limit-Max | 6V |
| Input Bias Current | 500nA |
| Voltage - Input Offset (Max) | 3mV @ 5.5V |
| Current - Input Bias (Max) | 0.5μA @ 5V |
| CMRR, PSRR (Typ) | 95dB CMRR, 82dB PSRR |
| Propagation Delay (Max) | 9ns |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX9012ESA+T Overview
In order to facilitate transportation, it is packaged in 8-SOIC (0.154, 3.90mm Width) .The comparator has an output type of TTL .This chip is designed with the Tape & Reel (TR) package.Electronic comparator is possible to find the 8 terminals of the comparator.The electrical component here belongs to the Comparator family.With a voltage of 5V supplied, the comparator is capable of performing a wide range of demanding tasks.It's a typical General Purpose comparator.A total of 2 elements can be found in it.The board includes 8 pins.In general, mounting type Surface Mount is recommended.Electronic comparator is recommended that the operating temperature be set to -40°C~85°C in order to prevent malfunctions.You can search MAX9012 if you are looking for more pin-to-pin solutions.There is a quiescent current of 4.2mA in this comparator.Electronic comparator has a Surface Mount for mounting on PCB or other boards.For normal use of the device, the nominal supply current should be 4.2mA .If the current supply exceeds 4.2mA , the comparator might be damaged.The voltage formula shows that the part has a voltage gain of 69.54dB .
MAX9012ESA+T Features
TTL output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 4.2mA
Voltage Gain: 69.54dB
MAX9012ESA+T Applications
There are a lot of Maxim Integrated MAX9012ESA+T linear comparators applications.
- General-Purpose, Low-Voltage Applications
- Security Detection Systems
- Limit Comparators
- General-Purpose Portable Devices
- Laptop Computers
- Analog front end
- Pulse, Squarewave, and Time Delay Generators
- Automatic Test Equipment
- Wide Range VCO; MOS Clock Timers
- Zero-Crossing Detectors
