MAX9012EUA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2002 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Max Power Dissipation | 471mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX9012 |
| Pin Count | 8 |
| Output Type | TTL |
| Number of Elements | 2 |
| Nominal Supply Current | 4.2mA |
| Output Current | 40mA |
| Max Supply Current | 4.2mA |
| Propagation Delay | 9 ns |
| Quiescent Current | 4.2mA |
| Common Mode Rejection Ratio | 95 dB |
| Voltage - Supply, Single/Dual (±) | 4.5V~5.5V |
| Input Offset Voltage (Vos) | 3mV |
| Voltage Gain | 69.54dB |
| Power Supply Rejection Ratio (PSRR) | 82dB |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 500nA |
| Input Bias Current | 2μA |
| Voltage - Input Offset (Max) | 3mV @ 5.5V |
| Current - Input Bias (Max) | 0.5μA @ 5V |
| CMRR, PSRR (Typ) | 95dB CMRR, 82dB PSRR |
| Height | 890μm |
| Length | 3.05mm |
| Width | 2.95mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX9012EUA+ Overview
Electronic comparator is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) for convenient transportation.Output type TTL is used for this comparator.As a result, it is designed with Tube package.8 terminals are found on the comparator.The electrical component in this case belongs to the Comparator families.With a voltage of 5V supplied, the comparator is capable of performing a wide range of demanding tasks.In terms of type, this is a typical General Purpose comparator.Electronic comparator has a total of 2 elements.The board includes 8 pins.Surface Mount universial mout for easy adapting.Electronic comparator is recommended that you set the operating temperature to -40°C~85°C in order to prevent malfunctions.8 pins are available on the comparator.Search MAX9012 to find more pin-to-pin solutions.In this comparator, the quiescent current is 4.2mA .There is a Surface Mount on the board for mounting to a PCB or other board.For normal use of the device, the nominal supply current should be 4.2mA .If the current supply exceeds 4.2mA , the comparator might be damaged.The maximal current your can input into the device is 500nA .The voltage gain of the part is indicated by 69.54dB in the voltage formula.
MAX9012EUA+ Features
TTL output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 4.2mA
Voltage Gain: 69.54dB
MAX9012EUA+ Applications
There are a lot of Maxim Integrated MAX9012EUA+ linear comparators applications.
- Appliances
- Industrial
- Battery management and protection
- Handheld Instruments
- General-Purpose Portable Devices
- Multivibrators and High-Voltage Digital Logic Gates
- Portable Battery Monitoring
- Infotainment & cluster
- Mobile Communications
- Zero-Crossing Detectors
