MAX9012EUA-T
| Parameters | |
|---|---|
| Type | General Purpose |
| Subcategory | Comparator |
| Max Power Dissipation | 471mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX9012 |
| Pin Count | 8 |
| Output Type | TTL |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Nominal Supply Current | 4.2mA |
| Output Current | 40mA |
| Max Supply Current | 4.2mA |
| Propagation Delay | 9 ns |
| Quiescent Current | 4.2mA |
| Common Mode Rejection Ratio | 82 dB |
| Voltage - Supply, Single/Dual (±) | 4.5V~5.5V |
| Input Offset Voltage (Vos) | 3mV |
| Voltage Gain | 69.54dB |
| Power Supply Rejection Ratio (PSRR) | 82dB |
| Supply Voltage Limit-Max | 6V |
| Input Bias Current | 500nA |
| Voltage - Input Offset (Max) | 3mV @ 5.5V |
| Current - Input Bias (Max) | 0.5μA @ 5V |
| CMRR, PSRR (Typ) | 95dB CMRR, 82dB PSRR |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 1998 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
MAX9012EUA-T Overview
For convenience, it is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) .The comparator has a TTL output.This device is designed in Tape & Reel (TR) case.8 terminals are found on the comparator.Electronic comparator is a part of Comparator family.With a 5V voltage supply, the comparator can perform multiple demanding tasks.When it comes to types, this comparator is a typical General Purpose .This element consists of 2 elements in total.There are 8 pins on this board.A Surface Mount mounting type is recommended.Ideally, the operating temperature should be set at -40°C~85°C in order to prevent malfunction.This comparator has 8 pins.You can find more pin-to-pin solutions for your special requirements by searching MAX9012 .There is 4.2mA current flowing in this comparator.A Surface Mount is provided for mounting on PCBs or other boards.Normally, the nominal supply current should be 4.2mA .The compartator could be damaged if the current supply exceeds 4.2mA .The voltage formula shows that the part has a voltage gain of 69.54dB .In order to operate normally, a supply voltage of 0 is required.
MAX9012EUA-T Features
TTL output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 4.2mA
Voltage Gain: 69.54dB
MAX9012EUA-T Applications
There are a lot of Maxim Integrated MAX9012EUA-T linear comparators applications.
- Mobile Phones
- System control and monitoring
- Mobile Phones and Tablets
- High-Speed Sampling Circuits
- General-Purpose, Low-Voltage Applications
- Ultra-Low Power Systems
- Battery-Powered Electronics
- Wearable Devices
- Hand-Held Electronics
- Wireless Base Stations
