MAX9013ESA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2002 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | with Latch |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Max Power Dissipation | 362mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | MAX9013 |
| Pin Count | 8 |
| Output Type | Complementary, TTL |
| Number of Elements | 1 |
| Power Supplies | 5V |
| Nominal Supply Current | 2.3mA |
| Output Current | 40mA |
| Max Supply Current | 2.1mA |
| Propagation Delay | 9 ns |
| Quiescent Current | 2.3mA |
| Response Time | 5.5 ns |
| Common Mode Rejection Ratio | 95 dB |
| Voltage - Supply, Single/Dual (±) | 4.5V~5.5V |
| Input Offset Voltage (Vos) | 3mV |
| Voltage Gain | 69.54dB |
| Power Supply Rejection Ratio (PSRR) | 82dB |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 500nA |
| Input Bias Current | 2μA |
| Voltage - Input Offset (Max) | 3mV @ 5.5V |
| Current - Input Bias (Max) | 0.5μA @ 5V |
| CMRR, PSRR (Typ) | 95dB CMRR, 82dB PSRR |
| Current - Output (Typ) | 40mA |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX9013ESA+ Overview
In order to make transportation easier, it is packaged in 8-SOIC (0.154, 3.90mm Width) .The comparator has a Complementary, TTL output.Ready for shipping in Tube package.The comparator has 8 terminals.The electrical component in this case belongs to the Comparator family.In the presence of a 5V voltage, the comparator is capable of accomplishing a variety of demanding tasks.A comparator of this type is typically of type with Latch .Currently, it consists of only 1 elements.The board includes 8 pins.The recommended mounting type is Surface Mount .Ideally, the operating temperature should be set at -40°C~85°C in order to prevent malfunction.Electronic comparator has 8 pins.You can find more pin-to-pin solutions for your special requirements by searching MAX9013 .A quiescent current of 2.3mA is observed in this comparator.The PCB or other board has a Surface Mount for mounting.For normal use of the device, the nominal supply current should be 2.3mA .An excess of current supply over 2.1mA could result in malfunction of the comparator.The device can be operated with 5V power supplies.Input current to the device cannot exceed 500nA .Comparator electronics is clear from the voltage formula that the voltage gain of the part is 69.54dB .
MAX9013ESA+ Features
Complementary, TTL output capability
with Latch IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 2.3mA
Voltage Gain: 69.54dB
MAX9013ESA+ Applications
There are a lot of Maxim Integrated MAX9013ESA+ linear comparators applications.
- Window Comparators
- RC Timers
- Metering Systems
- Threshold Detectors
- Notebooks and PDAs
- Simple Analog-to-Digital Converters (ADCs)
- Hand-Held Electronics
- Limit Comparators
- Power Supervision
- Zero-Crossing Detectors
