MAX9013ESA+T
| Parameters | |
|---|---|
| Quiescent Current | 2.3mA |
| Common Mode Rejection Ratio | 82 dB |
| Voltage - Supply, Single/Dual (±) | 4.5V~5.5V |
| Input Offset Voltage (Vos) | 3mV |
| Voltage Gain | 69.54dB |
| Power Supply Rejection Ratio (PSRR) | 82dB |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 500nA |
| Input Bias Current | 2μA |
| Voltage - Input Offset (Max) | 3mV @ 5.5V |
| Current - Input Bias (Max) | 0.5μA @ 5V |
| CMRR, PSRR (Typ) | 95dB CMRR, 82dB PSRR |
| Current - Output (Typ) | 40mA |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2002 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | with Latch |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Max Power Dissipation | 362mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | MAX9013 |
| Pin Count | 8 |
| JESD-30 Code | R-PDSO-G8 |
| Output Type | Complementary, TTL |
| Number of Elements | 1 |
| Nominal Supply Current | 2.3mA |
| Output Current | 40mA |
| Max Supply Current | 2.1mA |
| Propagation Delay | 9 ns |
MAX9013ESA+T Overview
For convenience, it is packaged in 8-SOIC (0.154, 3.90mm Width) .There is a Complementary, TTL output type for this comparator.Electronic comparator is shipped by Tape & Reel (TR) .Electronic comparator is possible to find the 8 terminals of the comparator.The chip belongs to Comparator .With a 5V voltage supply, the comparator can perform multiple demanding tasks.In general, the chip type can be classified as with Latch .This element consists of 1 elements in total.The device includes 8 pins.The recommended mounting type is Surface Mount .Electronic comparator is recommended that the operating temperature be set to -40°C~85°C to prevent malfunctions.You may wish to search MAX9013 for more solutions that address your specific needs.The comparator presents a quiescent current of 2.3mA volts.The board has a Surface Mount for mounting on a PCB or any other board.Electronic comparator is recommended that the nominal supply current of the device be 2.3mA .Electronic comparator is possible for the comparator to malfunction if the current supply exceeds 2.1mA .You can input a maximum current of 500nA into this device.According to the voltage formula, the part has a voltage gain of 69.54dB .
MAX9013ESA+T Features
Complementary, TTL output capability
with Latch IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 2.3mA
Voltage Gain: 69.54dB
MAX9013ESA+T Applications
There are a lot of Maxim Integrated MAX9013ESA+T linear comparators applications.
- Hand-Held Electronics
- Ultra-Low Power Systems
- Window Comparators
- Mobile Phones and Tablets
- Simple Analog-to-Digital Converters (ADCs)
- Security Detection Systems
- Wide Range VCO; MOS Clock Timers
- Infotainment & cluster
- Set Top Boxes
- Motor drives
