banner_page

MAX9013EUA

Surface Mount Tube 40mA mA 5.5 ns μs Linear Comparators 69.54dB dB 2μA pA 2002 2.3mA μA 3mV mV Surface Mount


  • Manufacturer: Maxim Integrated
  • Nocochips NO: 503-MAX9013EUA
  • Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
  • Datasheet: PDF
  • Stock: 619
  • Description: Surface Mount Tube 40mA mA 5.5 ns μs Linear Comparators 69.54dB dB 2μA pA 2002 2.3mA μA 3mV mV Surface Mount (Kg)

Details

Tags

Parameters
Contact Plating Tin
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Number of Pins 8
Operating Temperature -40°C~85°C
Packaging Tube
Published 2002
JESD-609 Code e0
Pbfree Code no
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Type with Latch
Subcategory Comparator
Max Power Dissipation 362mW
Technology BIPOLAR
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 245
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 0.65mm
Base Part Number MAX9013
Pin Count 8
Output Type Complementary, TTL
Operating Supply Voltage 5V
Number of Elements 1
Power Supplies 5V
Number of Circuits 1
Nominal Supply Current 2.3mA
Output Current 40mA
Max Supply Current 2.1mA
Propagation Delay 9 ns
Quiescent Current 2.3mA
Response Time 5.5 ns
Common Mode Rejection Ratio 95 dB
Voltage - Supply, Single/Dual (±) 4.5V~5.5V
Input Offset Voltage (Vos) 3mV
Voltage Gain 69.54dB
Power Supply Rejection Ratio (PSRR) 82dB
Supply Voltage Limit-Max 6V
Max Input Current 500nA
Input Bias Current 2μA
Voltage - Input Offset (Max) 3mV @ 5.5V
Current - Input Bias (Max) 0.5μA @ 5V
CMRR, PSRR (Typ) 95dB CMRR, 82dB PSRR
Height 950μm
Length 3.1mm
Width 3.1mm
Radiation Hardening No
REACH SVHC Unknown
RoHS Status ROHS3 Compliant
Lead Free Lead Free

MAX9013EUA Overview


In order to make transportation easier, it is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) .The comparator has a Complementary, TTL output.This chip is designed with the Tube package.As you can see, the comparator has8 terminals.The electrical component in this case belongs to the Comparator family.Electronic comparator is capable of performing numerous tasks when powered by 5V voltage.The type of the chip can be classified as with Latch .Currently, it consists of only 1 elements.A total of 8 pins are included.Surface Mount universial mout for easy adapting.A temperature setting of -40°C~85°C should be used for the operating temperature in order to prevent malfunctions.There are 8 pins on the comparator.Alternatively, you may search for MAX9013 to find more pin-to-pin solutions for your specific needs.A quiescent current of 2.3mA is observed in this comparator.This component has a Surface Mount mount for mounting to PCBs or other boards.Normally, the nominal supply current should be 2.3mA when using the device.If the current supply exceeds 2.1mA , the comparator could malfunction.A power supply of 5V is sufficient for the operation of the device.Electronic comparator is possible to input a maximum of 500nA current into the device.Comparator electronics is apparent from the voltage formula that the voltage gain for the part is 69.54dB .A normal operation requires a voltage of 5V .

MAX9013EUA Features


Complementary, TTL output capability
with Latch IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 2.3mA
Voltage Gain: 69.54dB

MAX9013EUA Applications


There are a lot of Maxim Integrated MAX9013EUA linear comparators applications.

  • Notebooks and PDAs
  • Limit Comparators
  • Window Comparators, Multivibrators
  • Battery-Powered Electronics
  • Battery-Powered Electronics
  • Body Control Modules
  • Wireless Base Stations
  • Consumer Medical Electronics
  • Automotive
  • RC Timers

Write a review

Note: HTML is not translated!
    Bad           Good