MAX9013EUA-T
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2002 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | with Latch |
| Terminal Finish | TIN LEAD |
| Subcategory | Comparator |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX9013 |
| Pin Count | 8 |
| JESD-30 Code | S-PDSO-G8 |
| Qualification Status | Not Qualified |
| Output Type | Complementary, TTL |
| Number of Elements | 1 |
| Voltage - Supply, Single/Dual (±) | 4.5V~5.5V |
| Average Bias Current-Max (IIB) | 2μA |
| Supply Voltage Limit-Max | 6V |
| Current - Quiescent (Max) | 2.3mA |
| Voltage - Input Offset (Max) | 3mV @ 5.5V |
| Current - Input Bias (Max) | 0.5μA @ 5V |
| CMRR, PSRR (Typ) | 95dB CMRR, 82dB PSRR |
| Current - Output (Typ) | 40mA |
| Propagation Delay (Max) | 9ns |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
MAX9013EUA-T Overview
To facilitate transportation, it comes packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) .The comparator has a type Complementary, TTL output.Ready for shipping in Tape & Reel (TR) package.The comparator has 8 terminals.Electronic comparator is a component of the Comparator family.This comparator is capable of handling a wide range of tasks if it is supplied with a voltage of 5V .The type of the chip can be classified as with Latch .Electronic comparator has a total of 1 elements.The pinout of the component starts from 8 pins it has.Electronic comparator is recommended that you mount the device using type Surface Mount .The operating temperature should be set to -40°C~85°C to avoid mal-function.Try search MAX9013 to get more pin-to-pin solutions for your special needs.
MAX9013EUA-T Features
Complementary, TTL output capability
with Latch IC
Employing 1 elements
Operates under -40°C~85°C
MAX9013EUA-T Applications
There are a lot of Maxim Integrated MAX9013EUA-T linear comparators applications.
- Security Detection Systems
- Wearable Devices
- Set Top Boxes
- Building automation
- High-Speed Differential Line Receiver
- Battery management and protection
- Notebooks and PDAs
- Zero-Crossing Detectors
- Analog front end
- Industrial
