Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
Number of Pins |
8 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
Published |
2002 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Type |
with Latch |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Comparator |
Max Power Dissipation |
362mW |
Technology |
BIPOLAR |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
0.65mm |
Base Part Number |
MAX9013 |
Pin Count |
8 |
Output Type |
Complementary, TTL |
Number of Elements |
1 |
Nominal Supply Current |
2.3mA |
Output Current |
40mA |
Max Supply Current |
2.1mA |
Propagation Delay |
9 ns |
Quiescent Current |
2.3mA |
Common Mode Rejection Ratio |
82 dB |
Voltage - Supply, Single/Dual (±) |
4.5V~5.5V |
Input Offset Voltage (Vos) |
3mV |
Voltage Gain |
69.54dB |
Power Supply Rejection Ratio (PSRR) |
82dB |
Supply Voltage Limit-Max |
6V |
Max Input Current |
500nA |
Input Bias Current |
2μA |
Voltage - Input Offset (Max) |
3mV @ 5.5V |
Current - Input Bias (Max) |
0.5μA @ 5V |
CMRR, PSRR (Typ) |
95dB CMRR, 82dB PSRR |
Current - Output (Typ) |
40mA |
Length |
3mm |
Width |
3mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
MAX9013EUA+T Overview
In order to make transportation easier, it is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) .This comparator is of the Complementary, TTL output type.This chip is designed with the Tape & Reel (TR) package.The device is designed with 8 terminations.The electrical component in this case belongs to the Comparator families.In the presence of a 5V voltage, the comparator is capable of accomplishing a variety of demanding tasks.Electronic comparator can be classified as a with Latch chip.A total of 1 elements can be found in it.The device is equipped with 8 pins.The recommended mounting type is Surface Mount .Electronic comparator is recommended that the operating temperature be set to -40°C~85°C to prevent malfunctions.The comparator has a pin count of 8 .You can find more pin-to-pin solutions for your special requirements by searching MAX9013 .There is a quiescent current of 2.3mA in this comparator.This component has a Surface Mount mount for mounting to PCBs or other boards.Electronic comparator is recommended that the nominal supply current of the device be 2.3mA .An excess of current supply over 2.1mA could result in malfunction of the comparator.Electronic comparator is possible to input a maximum of 500nA current into the device.A voltage gain of 69.54dB can be determined from the voltage formula for the part.
MAX9013EUA+T Features
Complementary, TTL output capability
with Latch IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 2.3mA
Voltage Gain: 69.54dB
MAX9013EUA+T Applications
There are a lot of Maxim Integrated MAX9013EUA+T linear comparators applications.
- Simple Analog-to-Digital Converters (ADCs)
- RC Timers
- Industrial
- High-Speed Differential Line Receiver
- General Purpose Low Voltage Applications
- Wearable Devices
- Window Comparators
- Lithium ion battery monitoring
- Automotive
- Point of load regulators