MAX9017AEKA+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-8 |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| Series | Beyond-the-Rails™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | with Voltage Reference |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Max Power Dissipation | 727mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX9017 |
| Pin Count | 8 |
| Output Type | CMOS, Push-Pull, Rail-to-Rail |
| Number of Elements | 2 |
| Power Supplies | 5V |
| Nominal Supply Current | 2.3μA |
| Output Current | 50mA |
| Max Supply Current | 2.3μA |
| Propagation Delay | 28 μs |
| Quiescent Current | 2.8μA |
| Response Time | 28000 ns |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V |
| Input Offset Voltage (Vos) | 5mV |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 1nA |
| Input Bias Current | 1nA |
| Current - Quiescent (Max) | 2.8μA |
| Voltage - Input Offset (Max) | 5mV @ 5V |
| Current - Input Bias (Max) | 0.001μA @ 5V |
| Hysteresis | 4mV |
| CMRR, PSRR (Typ) | 80dB PSRR |
| Height Seated (Max) | 1.45mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX9017AEKA+T Overview
In order to make transportation easier, it is packaged in SOT-23-8 .The comparator has an output type of CMOS, Push-Pull, Rail-to-Rail .As a result, it is designed with Tape & Reel (TR) package.You can find 8 terminals of the comparator.Electronic comparator is a component of the Comparator family.A comparator is capable of completing a variety of demanding tasks when supplied with 5V voltage.Speaking of types, this is a typical with Voltage Reference comparator.There are a total of 2 elements in it.Electronic comparator has 8 pins.Electronic comparator is recommended to mount the device using type Surface Mount .As a precaution, it is recommended to set the operating temperature to -40°C~85°C to prevent malfunctions.The comparator consists of 8 pins.You may wish to search MAX9017 for more solutions that address your specific needs.There is a quiescent current of 2.8μA in this comparator.Electronic comparator has a Surface Mount for mounting on PCB or other boards.Normal operation of the device requires a nominal supply current of 2.3μA .The compartator could be damaged if the current supply exceeds 2.3μA .In order to operate the device, 5V power supplies are sufficient.Input current to the device cannot exceed 1nA .Comparator electronics is part of the Beyond-the-Rails? comparator series.
MAX9017AEKA+T Features
CMOS, Push-Pull, Rail-to-Rail output capability
with Voltage Reference IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 2.8μA
MAX9017AEKA+T Applications
There are a lot of Maxim Integrated MAX9017AEKA+T linear comparators applications.
- Automotive
- Handheld Instruments
- Battery-Powered Electronics
- Metering Systems
- Lithium ion battery monitoring
- Multivibrators and High-Voltage Digital Logic Gates
- DC/DC and AC/DC power supplies
- Analog front end
- High-Speed Differential Line Receiver
- Mobile Phones
