MAX9018BEKA+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-8 |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| Series | Beyond-the-Rails™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | with Voltage Reference |
| Subcategory | Comparator |
| Max Power Dissipation | 727mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX9018 |
| Pin Count | 8 |
| Output Type | CMOS, Open-Drain, Rail-to-Rail |
| Number of Elements | 2 |
| Power Supplies | 5V |
| Nominal Supply Current | 2.3μA |
| Output Current | 50mA |
| Max Supply Current | 2.3μA |
| Propagation Delay | 31 μs |
| Quiescent Current | 2.8μA |
| Response Time | 31000 ns |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V |
| Input Offset Voltage (Vos) | 5mV |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 1nA |
| Input Bias Current | 1nA |
| Voltage - Input Offset (Max) | 5mV @ 5V |
| Current - Input Bias (Max) | 0.001μA @ 5V |
| Hysteresis | 4mV |
| Height Seated (Max) | 1.45mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX9018BEKA+T Overview
The product is packaged in SOT-23-8 in order to facilitate transportation.A comparator with a CMOS, Open-Drain, Rail-to-Rail output is used here.This package has been designed with Tape & Reel (TR) .8 terminals are found on the comparator.The component belongs to the Comparator family of electrical components.A comparator supplied with 5V voltage can complete many demanding tasks.The type of the chip can be classified as with Voltage Reference .Electronic comparator has a total of 2 elements.As a result, it contains 8 pins.Electronic comparator is recommended to mount using type Surface Mount .Electronic comparator is recommended that the operating temperature be set to -40°C~85°C to prevent malfunctions.8 pins are present on the comparator.You can search MAX9018 if you are looking for more pin-to-pin solutions.There is a quiescent current of 2.8μA in this comparator.A Surface Mount is provided for mounting on PCBs or other boards.Electronic comparator is recommended that the nominal supply current for the device be set to 2.3μA .If the current supply exceeds 2.3μA , the comparator might be damaged.5V power supplies are enough to run the device.Electronic comparator is possible to input up to 1nA current into the device.Comparator electronics is a comparator part from the Beyond-the-Rails? series.
MAX9018BEKA+T Features
CMOS, Open-Drain, Rail-to-Rail output capability
with Voltage Reference IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 2.8μA
MAX9018BEKA+T Applications
There are a lot of Maxim Integrated MAX9018BEKA+T linear comparators applications.
- Building automation
- Self-diagnostics
- DC/DC and AC/DC power supplies
- Threshold Detectors
- Mobile Phones
- Zero-Crossing Detectors
- General-Purpose, Low-Voltage Applications
- Point of load regulators
- Handheld Instruments
- Limit Comparators
