Parameters |
Factory Lead Time |
1 Week |
Contact Plating |
Tin |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
SOT-23-8 |
Number of Pins |
8 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
Published |
2012 |
Series |
Beyond-the-Rails™ |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Type |
General Purpose |
Subcategory |
Comparators |
Max Power Dissipation |
727mW |
Technology |
BICMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
5V |
Terminal Pitch |
0.65mm |
Base Part Number |
MAX9019 |
Pin Count |
8 |
Output Type |
CMOS, Push-Pull, Rail-to-Rail |
Number of Elements |
2 |
Power Supplies |
5V |
Nominal Supply Current |
1.7μA |
Output Current |
50mA |
Max Supply Current |
1.7μA |
Propagation Delay |
28 μs |
Quiescent Current |
2μA |
Response Time |
28000 ns |
Common Mode Rejection Ratio |
80 dB |
Voltage - Supply, Single/Dual (±) |
1.8V~5.5V |
Input Offset Voltage (Vos) |
5mV |
Power Supply Rejection Ratio (PSRR) |
80dB |
Supply Voltage Limit-Max |
6V |
Max Input Current |
1nA |
Dual Supply Voltage |
5.5V |
Input Bias Current |
1nA |
Current - Quiescent (Max) |
2μA |
Voltage - Input Offset (Max) |
5mV @ 5V |
Current - Input Bias (Max) |
0.001μA @ 5V |
Hysteresis |
4mV |
CMRR, PSRR (Typ) |
80dB PSRR |
Height |
1.3mm |
Length |
3mm |
Width |
1.75mm |
Radiation Hardening |
No |
REACH SVHC |
Unknown |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
MAX9019EKA+T Overview
In order to facilitate transportation, it is packaged in SOT-23-8 .There is a comparator of type CMOS, Push-Pull, Rail-to-Rail output on this device.The part is shipped by Tape & Reel (TR) .8 terminals are found on the comparator.Electronic comparator is a component of the Comparators family.Supplied by 5V voltage, the comparator can accomplish the many demanding tasks.Electronic comparator can be classified as a General Purpose chip.This element consists of 2 elements in total.The device includes 8 pins.The recommended mounting method is Surface Mount .In order to avoid malfunctions, the operating temperature should be set to -40°C~85°C .Electronic comparator has 8 pins.You can find more pin-to-pin solutions for your special requirements by searching MAX9019 .There is a quiescent current of 2μA in this comparator.The board has a Surface Mount for mounting on a PCB or any other board.For normal use of the device, the nominal supply current should be 1.7μA .If the current supply exceeds 1.7μA , the comparator could malfunction.This device requires 5V power supplies to operate.The maximal current your can input into the device is 1nA .In this case, the part is from the Beyond-the-Rails? comparator series.
MAX9019EKA+T Features
CMOS, Push-Pull, Rail-to-Rail output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 2μA
MAX9019EKA+T Applications
There are a lot of Maxim Integrated MAX9019EKA+T linear comparators applications.
- Hand-Held Electronics
- Window Comparators
- Set Top Boxes
- Wearable Devices
- Wide Range VCO; MOS Clock Timers
- Analog front end
- Ultra-Low Power Systems
- Power management
- Mobile Phones and Tablets
- Pulse, Squarewave, and Time Delay Generators