MAX901ACPE
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Comparator |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Base Part Number | MAX901 |
| Pin Count | 16 |
| Output Type | TTL |
| Number of Elements | 4 |
| Power Supplies | 55/10GND/-5V |
| Nominal Supply Current | -12mA |
| Max Supply Current | -12mA |
| Quiescent Current | 6mA |
| Response Time | 8 ns |
| Common Mode Rejection Ratio | 86.02 dB |
| Voltage - Supply, Single/Dual (±) | 5V~10V ±2.5V~5V |
| Input Offset Voltage (Vos) | 2mV |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Average Bias Current-Max (IIB) | 10μA |
| Power Supply Rejection Ratio (PSRR) | 86.02dB |
| Supply Voltage Limit-Max | 6V |
| Input Bias Current | 6μA |
| Neg Supply Voltage-Max (Vsup) | -6V |
| Current - Quiescent (Max) | 15mA 12mA 6mA |
| Voltage - Input Offset (Max) | 2mV @ ±5V |
| Current - Input Bias (Max) | 6μA @ ±5V |
| CMRR, PSRR (Typ) | 86.02dB CMRR, 86.02dB PSRR |
| Length | 19.175mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MAX901ACPE Overview
The product is packaged in 16-DIP (0.300, 7.62mm) to facilitate transportation.There is a TTL output type for this comparator.This device is designed in Tube case.The comparator has a total of 16 terminals.The electrical component in this case belongs to the Comparator family.In the presence of a 5V voltage, the comparator is capable of accomplishing a variety of demanding tasks.The type of the chip can be classified as General Purpose .This is a 4 element comparator.Electronic comparator has 16 pins.Electronic comparator is recommended to mount the device using type Through Hole .Ideally, the operating temperature should be set at 0°C~70°C in order to prevent malfunction.16 pins are present on the comparator.You can search MAX901 if you are looking for more pin-to-pin solutions.A quiescent current of 6mA is displayed by this comparator.There is a Through Hole for mounting it on a PCB or other board.The nominal supply current of the device should be -12mA for normal use.The compartator could be damaged if the current supply exceeds -12mA .In order to run the device, there are only 55/10GND/-5V power supplies required.
MAX901ACPE Features
TTL output capability
General Purpose IC
Employing 4 elements
Operates under 0°C~70°C
Quiescent Current: 6mA
MAX901ACPE Applications
There are a lot of Maxim Integrated MAX901ACPE linear comparators applications.
- Mobile Phones and Tablets
- Hand-Held Electronics
- Point of load regulators
- RC Timers
- Zero-Crossing Detectors
- Handheld Instruments
- Metering Systems
- Motor drives
- Laptop Computers
- Limit Comparators
