banner_page

MAX901ACSE+T

Surface Mount Tape & Reel (TR) 8 ns μs Linear Comparators 6μA pA 2005 -12mA μA 2mV mV Surface Mount


  • Manufacturer: Maxim Integrated
  • Nocochips NO: 503-MAX901ACSE+T
  • Package: 16-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 247
  • Description: Surface Mount Tape & Reel (TR) 8 ns μs Linear Comparators 6μA pA 2005 -12mA μA 2mV mV Surface Mount (Kg)

Details

Tags

Parameters
Output Type TTL
Number of Elements 4
Power Supplies 55/10GND/-5V
Nominal Supply Current -12mA
Max Supply Current -12mA
Quiescent Current 6mA
Response Time 8 ns
Common Mode Rejection Ratio 86.02 dB
Voltage - Supply, Single/Dual (±) 5V~10V ±2.5V~5V
Input Offset Voltage (Vos) 2mV
Neg Supply Voltage-Nom (Vsup) -5V
Average Bias Current-Max (IIB) 10μA
Power Supply Rejection Ratio (PSRR) 86.02dB
Supply Voltage Limit-Max 6V
Input Bias Current 6μA
Neg Supply Voltage-Max (Vsup) -6V
Current - Quiescent (Max) 15mA 12mA 6mA
Voltage - Input Offset (Max) 2mV @ ±5V
Current - Input Bias (Max) 6μA @ ±5V
CMRR, PSRR (Typ) 86.02dB CMRR, 86.02dB PSRR
Height Seated (Max) 1.75mm
Length 9.9mm
Width 3.9mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 16-SOIC (0.154, 3.90mm Width)
Number of Pins 16
Operating Temperature 0°C~70°C
Packaging Tape & Reel (TR)
Published 2005
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
ECCN Code EAR99
Type General Purpose
Terminal Finish Matte Tin (Sn)
Subcategory Comparator
Max Power Dissipation 500mW
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 4
Supply Voltage 5V
Terminal Pitch 1.27mm
Base Part Number MAX901
Pin Count 16

MAX901ACSE+T Overview


A convenient transport package is provided in 16-SOIC (0.154, 3.90mm Width) .The comparator has an output type of TTL .Electronic comparator is shipped by Tape & Reel (TR) .16 terminals are found on the comparator.The electrical component in this case belongs to the Comparator families.Supplied by 5V voltage, the comparator can accomplish the many demanding tasks.This is a typical comparator of type General Purpose .This is a 4 element comparator.As a result, it contains 16 pins.In general, mounting type Surface Mount is recommended.Ideally, the operating temperature should be set at 0°C~70°C in order to prevent malfunction.16 pins are available on the comparator.You can find more pin-to-pin solutions for your special requirements by searching MAX901 .There is a quiescent current of 6mA in this comparator.The PCB or other board has a Surface Mount for mounting.For normal use of the device, the nominal supply current should be -12mA .An excess of current supply over -12mA could result in malfunction of the comparator.The device can be powered by 55/10GND/-5V power supplies.

MAX901ACSE+T Features


TTL output capability
General Purpose IC
Employing 4 elements
Operates under 0°C~70°C
Quiescent Current: 6mA

MAX901ACSE+T Applications


There are a lot of Maxim Integrated MAX901ACSE+T linear comparators applications.

  • Self-diagnostics
  • Handheld Instruments
  • Ultra-Low Power Systems
  • High-Speed Differential Line Receiver
  • General-Purpose, Low-Voltage Applications
  • Automatic Test Equipment
  • Battery-Powered Electronics
  • Building automation
  • Mobile Phones
  • Lithium ion battery monitoring

Write a review

Note: HTML is not translated!
    Bad           Good