Parameters |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Mount |
Through Hole |
Mounting Type |
Through Hole |
Package / Case |
16-DIP (0.300, 7.62mm) |
Number of Pins |
16 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tube |
Published |
2005 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Type |
General Purpose |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Comparators |
Max Power Dissipation |
500mW |
Technology |
CMOS |
Terminal Position |
DUAL |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
5V |
Base Part Number |
MAX901 |
Pin Count |
16 |
Output Type |
TTL |
Number of Elements |
4 |
Power Supplies |
55/10GND/-5V |
Nominal Supply Current |
-12mA |
Max Supply Current |
-12mA |
Quiescent Current |
6mA |
Response Time |
8 ns |
Common Mode Rejection Ratio |
86.02 dB |
Voltage - Supply, Single/Dual (±) |
5V~10V ±2.5V~5V |
Input Offset Voltage (Vos) |
2mV |
Neg Supply Voltage-Nom (Vsup) |
-5V |
Average Bias Current-Max (IIB) |
10μA |
Power Supply Rejection Ratio (PSRR) |
86.02dB |
Supply Voltage Limit-Max |
6V |
Max Input Current |
6μA |
Input Bias Current |
6μA |
Neg Supply Voltage-Max (Vsup) |
-6V |
Current - Quiescent (Max) |
15mA 12mA 6mA |
Voltage - Input Offset (Max) |
2mV @ ±5V |
Current - Input Bias (Max) |
6μA @ ±5V |
CMRR, PSRR (Typ) |
86.02dB CMRR, 86.02dB PSRR |
Length |
19.175mm |
Width |
7.62mm |
MAX901AEPE+ Overview
The product is packaged in 16-DIP (0.300, 7.62mm) for ease of transportation.Output type of this comparator is TTL .Ready for shipping in Tube package.There are16 terminals on the comparator.The electrical component in this case belongs to the Comparators families.In the presence of a 5V voltage, the comparator is capable of accomplishing a variety of demanding tasks.In general, the chip type can be classified as General Purpose .There are a total of 4 elements in it.The device is equipped with 16 pins.Electronic comparator is recommended that the mounting type be Through Hole .A temperature setting of -40°C~85°C should be used for the operating temperature in order to prevent malfunctions.The comparator is equipped with 16 pins.You can find more pin-to-pin solutions by searching MAX901 .This comparator presents a quiescent current of 6mA .This component has a Through Hole mount for mounting to PCBs or other boards.Electronic comparator is recommended that the nominal supply current for the device be set to -12mA .Current supply exceeding -12mA could cause disfunction of the compartator.55/10GND/-5V power supplies are enough to run the device.The maximal current your can input into the device is 6μA .
MAX901AEPE+ Features
TTL output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~85°C
Quiescent Current: 6mA
MAX901AEPE+ Applications
There are a lot of Maxim Integrated MAX901AEPE+ linear comparators applications.
- Threshold Detectors
- Battery-Powered Electronics
- Infotainment & cluster
- Laptop Computers
- Set Top Boxes
- High-Speed Differential Line Receiver
- Motor drives
- Battery management and protection
- Automatic Test Equipment
- Simple Analog-to-Digital Converters (ADCs)